No other griddle can match the production, consistency, and even
temperatures of the AccuSteam™ Griddle. The AccuSteam™ harnesses the
science of steam to deliver 100% usable surface area. Steam by nature is
attracted to anything colder than itself, which allows users to place cold
or frozen product on the griddle surface with near-instant surface
temperature recovery – regardless of food load. This results in even
surface temperatures without any hot or cold spots. Combined, these
benefits produce consistent product and decreased ticket times during peak
periods. The AccuSteam™ Griddle outperforms any griddle on the market and
is truly the gold standard in griddle cooking.
AccuTemp GGF1201A3650-T1 Consruction Features
Cold-rolled and annealed stainless steel griddle plate with polished
stainless steel body
7 gauge griddle plate with 4” high rear splash and 4” to 1 5/16” tapered
side walls
3 7/8” wide by ½” deep full front grease trough
1 ½ x 3 ½” drop chute to 5 [24”], 6 ½ [36”, 48”] quart capacity grease
pan
Rapid surface temperature recovery allows turning product to same spot
Smooth cold-rolled stainless steel griddle surface speeds and simplifies
cleaning
AccuTemp GGF1201A3650-T1 Standart Control Features
Heating indicator light
200–400°F (93–204°C) digital thermostat
Easy front service access to controls
Control guard
3 preset temperatures capable
Instant surface temperature readout
Manager mode to lock out temperature controls
Over temperature indicator light
AccuTemp GGF1201A3650-T1 Specification
Griddle shall be an ENERGY STAR compliant gas-heated unit, with a
hermetically sealed vacuum chamber that produces steam that heats the
7-gauge stainless steel griddle plate. Efficient steam heat transfer
provides 200–400°F (93– 204°C) operating temperature range and uniform
griddle surface temperatures of ±5°F (±3°C). Griddle fabricated from
coldrolled stainless steel with 4” high back splash, sides that taper from
4” to 1 5/16”, a 3 7/8” wide by ½” deep full front grease trough and 5- 6
½ quart grease drawer. Unit to be ANSI Z83.11 Design Certified, UL EPH
Sanitation Certified (NSF/ANSI 4) and manufactured in the USA.