APW Wyott BM-30D Bottom Mount Series Uninsulated Hot Food Wells
APW Wyott BM-30D Designed Smart
Heavy-duty bottom mount, uninsulated rectangular hot food well is
designed for installation in metal countertop.
Hot food well accommodates standard size steamtable pans, in conjunction
with fabricated counter.
Comes standard with square corner pan design.
Unit is heated by tubular calrod heat element shaped in serpentine
fashion for even heat distribution to pan use.
Thermostatically controlled for fast heat recovery.
Well is constructed of deep-drawn, austenite stainless steel.
Units shipped with drain are provided with stainless steel 1/2 NPT drain
welded to bottom of pan and provided with removable screen.
Element mounted under well and secured by aluminized deflector shield
for maximum efficiency.
The units are available in a UL recognized component construction with
open wires and increase-decrease plate or complete UL Listed
construction including electrical conduit, bezel and control box.
APW Wyott BM-30D Designed Features
Deep-drawn stainless steel well pans.
Available with or without drain.
Unit may be used wet or dry (wet use offers best results).
Easy access to heating elements.
Thermostatic control with 36” capillary (effective length is 26”).
Large indicating pilot light.
Multiple units can be installed in same table or counter.
Multiple wattages and voltage choices.
APW Wyott BM-30D Specification
Construction: Well is constructed of austenite stainless steel, 6 1/4” deep in the
interior. Aluminized steel reflector pan. Units shipped with drain are
provided with stainless steel 1/2” NPT drain welded to bottom. Unit is
heated by tubular calrod heat element shaped in serpentine fashion for
even heat distribution to pan base. Element is mounted under well and
secured by aluminized reflector shield for maximum efficiency. Top
edge of unit has a 13/16” flange. Recommended flange turndown 3/4”.
BM-30 comes standard with square corner pan design. Thermostatic
control has 36” capillary (effective length 26”).