Atlas Metal CASB Flatware & Tray Cart
|Capacity||100 - 199 trays|
|Height||30 - 39"|
|Tray Size||12" x 22"|
Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. The top is provided with an opening to receive the appropriately sized tray dispenser unit, and includes two (2 ea.) silver bins with (8) nylon cylinders. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.
Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4" x 1-1/4". Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel and 7” rear apron of plastic laminate on .063 aluminum. Owner to specify finish.
The cart included a DIT series drop-in self-leveling tray dispenser installed in the top. Constructed of 18 gauge, type 304 stainless steel, welded, ground and polished. The outer edge of the flange shall be beveled for additional strength and to provide a snug fit with the counter top. The Self-Leveling Elevators shall be stainless steel, die stamped, telescoping tubing, with stainless steel non-fatiguing, compression type springs. Capacity is approximately 100 trays per stack.
The casters shall be 5” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.