Berkel X13AE-PLUS Electric Food Slicer

Berkel X13AE-PLUS Automatic Gravity Feed Meat Slicer with 13" Round Stainless Knife- 1/2 HP

BRK-X13AE-PLUS
Details

Berkel X13AE-PLUS Automatic Gravity Feed Meat Slicer with 13" Round Stainless Knife- 1/2 HP

SKU BRK-X13AE-PLUS
product-freeshipping

Call for price

Net 30 with Credit Key Apply Now

Certifications

cETLus
ETL-Sanitation
NSF

Berkel X13AE-PLUS Specs

Brand Berkel
Model Number X13AE-PLUS
Weight 141 lbs
Width 28"
Depth 30"
Height 26"
Power Type electric
Drive belt
Operation automatic feed
Knife Diameter 13"
Horsepower (approximate) 1/2 HP
Construction anodized aluminum
Feed angle/gravity
Certifications cETLus, ETL-Sanitation, NSF

Berkel X13AE-PLUS AUTOMATIC GRAVITY FEED SLICER

FEATURES

Berkel model X13AE-PLUS automatic gravity feed slicer offers a number of special features. A sanitary one piece engineered polymer base and product table reduces seams and joints while providing an NSF approved surface for easy, effective cleaning. A removable and submersible table mounted sharpener with borazon stones for accurate sharpening. Precise thickness control is achieved using a variable pitch barrel cam for fine adjustment and wafer thin slices. The index knob and operating controls are mounted outside of the drip zone for quick and easy access. The slicer can be automatically operated in three speeds, and with three different stroke lengths. A permanent ring guard protects the entire non-slicing portion of the knife during slicing and cleaning. A fence is included with the product table. An easy to use kick stand supports the slicer for easy access to clean under the slicer.

Berkel X13AE-PLUS Electric Food Slicer
Berkel X13AE-PLUS Electric Food Slicer

STANDARD FEATURES

  • 1-speed, 1 ⁄2 HP, permanently lubricated ball bearing knife motor with thermal protection.
  • Automatic operation in three speeds: 20, 40 or 60 slices/minute.
  • Three stroke lengths: 1 ⁄3, 2⁄3 and full stroke
  • Furnished in 120/60/1, 8 amps, AC, with 3 wire cord and plug.
  • One-piece NSF approved polymer base and product table for reduced seams, accessibility and easy cleaning.
  • Index knob conveniently located outside the drip zone in the upper left to provide quick and easy access.
  • 13" (330 mm) diameter, hollow ground, hardened and polished forged stainless steel knife
  • Large product table with extra capacity: Rectangles up to 10 1⁄2" x 6 3⁄4" (265 mm x 170 mm), Squares up to 7 1⁄2" (190 mm), Rounds up to 8 1⁄2" (220 mm) diameter

STANDARD FEATURES

  • Articulating and full length rear mounted meat pusher to secure and advance products evenly, fence to hold product during automatic operation.
  • Ergonomic, multi-grip handle to advance product table.
  • Submersible, removable product table mounted sharpener for consistent sharpening and easy cleaning.
  • Borazon sharpening stones for fast, accurate sharpening and extended life.
  • No-volt release requires restarting the slicer after a power interruption.
  • Permanent ring guard protects entire non-slicing portion of the knife.
  • Sealed start/stop switches conveniently located on the index knob housing out of the food zone.
  • LED indicates power to the slicer.
  • An easy to use kick stand for easy cleaning under the slicer.
Berkel X13AE-PLUS Electric Food Slicer

SPECIFICATIONS

Motor: Knife motor is 1-speed, 1 ⁄2 HP totally enclosed and permanently lubricated ball bearings, thermally protected. Table motor is brushless DC providing three fixed speeds, 20, 40 or 60 slices per minute. Three stroke lengths in the automatic mode, provide more slices/minute at the same speed.

Electrical: Furnished in 120/60/1, 8 amps, AC, ETL Listed, with a 6' long 3-wire cord and plug.

Finish/Construction: Base, product table, pusher, support arm and upper housing are constructed of NSF approved, engineered polymers reducing the number of seams. Gauge plate and center plate are anodized aluminum. All controls are sealed and located out of the drip zone.

Knife: 13" (330 mm) diameter, hollow ground, hardened and polished stainless steel

Knife Sharpener: Removable and submersible table mounted, two stone, dual action design to ensure correct pressure and contact angle are always applied, thus reducing knife wear and delivering a perfect edge. Borazon stones last longer, sharpen faster and clean easier.

Thickness Control: Index knob controls a precision, variable pitch barrel cam with ultra-fine adjustment in the first revolution and opens to a thickness of 1 5 ⁄16" (34 mm) for accurate and consistent slicing. This control is located out of the drip zone on the upper left to provide quick and easy access for operation and cleaning.

Gauge Plate Interlock: Mechanical interlock using twisted wire, aircraft cables. Table must be in the home position and gauge plate closed to remove table. Once table is removed, the gauge plate can not be opened.

Cutting Capacity: Rectangle 10 1⁄2" x 6 3⁄4" (265 x 170 mm), Square 7 1⁄2" (190 mm), Round 8 1⁄2" (220 mm)

Product Table: Full gravity feed 45° angle with articulating rear mounted pusher that runs the entire length of the table to secure product for increased yield and consistency in every slice. A fence provides stability for the product in automatic mode.

Kick Stand: An easy to use kick stand supports the slicer for easy access to clean under the slicer

No-volt Release: Requires restarting the slicer in the event of a power interruption.

Knife Ring Guard: Permanent tapered guard covers the non-slicing portion of the knife edge.

Controls: Sealed push-button switches located on the index knob housing out of the drip zone.

Warranty: Parts, labor and travel coverage for one year, exclusive of wear items.

Write Your Own Review
You're reviewing:Berkel X13AE-PLUS Automatic Gravity Feed Meat Slicer with 13" Round Stainless Knife- 1/2 HP
Your Rating