BevLes Company PHC32-10INS-A-4R1 Undercounter Mobile Heated Holding Proofing Cabinet

BevLes Company PHC32-10INS-A-4R1 Undercounter Mobile Heated Holding Proofing Cabinet


BevLes Company PHC32-10INS-A-4R1 Undercounter Mobile Heated Holding Proofing Cabinet

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

Proofing & Holding Cabinet, mobile, undercounter, insulated top, back & sides, (1) clear Lexan® right-hand hinged door, digital thermostat, variable humidity control & LED display, 80° to 180°F temperature range, adjustable aluminum pan supports on 1-1/2" centers accommodate (5) 18" x 26" or (10) 12" x 20" pans, removable heating module, 5 qt. cast water reservoir with cover, 3" swivel plate casters (2 with brakes), aluminum construction, 208-230v/50/60/1-ph, 2000 watts, 9.7/8.7 amps, cord only, cULus

BevLes Company PHC32-10INS-A-4R1 Specs

Brand BevLes Company
Model Number PHC32-10INS-A-4R1
Weight 190 lbs
Width 29"
Height 31.5"
Depth 33.5"
Pan Size universal
Exterior Finish all aluminum exterior
Height 31"H
Heater bottom mounted heater
Slides adjustable slides
Insulation insulated
Slide Capacity 5 pair
Centers 1-1/2" centers

The Bevles PHC32-10INS-A-4R1 Proofing and Holding Cabinet Insulated

Why Use Bevles Proofing Cabinet?

BevLes Combination Holding & Proofing cabinets are all aluminum construction and are available in insulated and non-insulated models. Universal extruded pan supports accommodate a wide variety of pans and screens while see-through Lexan doors with heavy-duty hinges feature positive closing latches and full perimeter gaskets.User-friendly, bottom-mounted controls feature independent heat and humidity adjustment. Temperatures range from 80° to 180°F (27° to 82°C) and the water reservoir holds up to 5 quarts (4.7 liters). Bevles "cast-in" humidity system prevents element burnout while providing added safety for the operator. All BevLes proofing and holding cabinets have a self-draining feature for excess moisture collection below the cabinet base into a standard 18"x26" bun pan - pan not included. Heavy-duty swivel-type plate casters with 5" (127mm.) rubber wheels, two with locks, provided.

Bevles PHC32-10INS-A-4R1 Features

  • Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of the cabinet
  • "Cast-in" humidity system prevents element burnout from water spills and potential injury from accidental contact with exposed heating element
  • All aluminum construction
  • Insulated top, side, and back
  • Extruded pan supports accept a variety of pans and screens
  • Removable heating module with separate controls for heat and humidity
  • Maintains uniform temperature and humidity throughout cabinet
  • Temperature adjustable from 60°F (15.6°C) to 180°F (82.2°C)
  • Completely removable interior components for quick and easy cleaning
  • Heavy-duty plate-type casters with 3" hardneoprene wheels, front two with brakes
  • 120V, 20A, 1PH service

Bevles PHC32-10INS-A-4R1 Specifications

Cabinet, Casters and Electrical

  • Body: .063 Formed aluminum
  • 1.50" Thick insulation top, sides and back
  • Door: Clear Lexan® with an extruded aluminum frame
  • Door Latch and Hinges: Positive action door latch with heavy-duty stainless steel hinges
  • Door Gasket: Closed cell foam
  • Base: .125 Formed aluminum
  • Rear (Air Duct) Panel: .063 Formed aluminum
  • 20 Amp Switch, and pilot light
  • Pan Supports: Aluminum pan supports adjustable on 1.50"centers
  • Cord and Plug: 8' cord with 20A molded plug (NEMA 5-20); 208/230 volt models provided with cord only
  • Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel, with wheel brakes on front two casters

Heating Module and Controls

  • Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly, easily removable for maintenance and cleaning
  • Air heating element rated at 1000watts
  • Humidity heating element rated at 400 watts
  • 5 quart (4.7 liter) cast waterreservoir
  • Lexan® water reservoir cover
  • Easy to operate controls feature digital thermostat, variable humidity control and LED display
  • All controls are visible and operable from exterior of cabinet

Bevles PHC32-10INS-A-4R1 Options and Accessories

  • Door hinging
  • Solid doors
  • Corner bumpers of gray non-marking vinyl (set of 4)
  • Additional extruded universal pan supports
  • Perimeter bumper of gray non-marking vinyl
  • 6" stainless steel legs with adjustable feet for stationary floor installation*
  • 5" casters with hard neoprene or polyurethane wheels
  • 18" x 26" chrome electroplated wire racks
  • Cord Guide/Protector: Unique cord guide provides safe and easy routing to rear of cabinet

* Note: Modifications involving casters or legs may affect the height of the equipment. Specifications subject to change without notice

Write Your Own Review
You're reviewing:BevLes Company PHC32-10INS-A-4R1 Undercounter Mobile Heated Holding Proofing Cabinet
Your Rating