The Bevles HCSS44W61 Climate Select Heated Holding Cabinet With Humidity
Why Use Bevles Heated Holding Cabinet?
Climate Select cabinets feature a 4-gallon water reservoir with low water
alarm for hours of uninterrupted service. Humidity is operator-controlled
for maximum flexibility and maximum holding time. Constructed of stainless
steel inside-and-out. Pan supports are stainless steel. Features include
fully insulated top, side, base and doors. Top mounted convection heating
system produces uniform temperature distribution down both sides and
features controls with a temperature range of 70° to 215°F (21° to 102°C).
Climate Select may be used as a proofer. Standard features include field
reversible, lift-off, self-closing hinges, magnetic door gasket and latch,
cooltouch handles and turn-knob locking device, radius corners, front and
rear pull grips, HD plate casters with 5" (127mm.) rubber wheels. Options
include left or right hand hinges, 120v 20 amp, or 208/230v 15 amp service
and more.
Bevles HCSS44W61 Features
Temperature adjustable from 60°F (15.6°C) to 215°F (102°C) for heating
and holding a variety of foods
Heating/Humidity system maintains proper
combination of heat and humidity throughout
cabinet
Individual thermostats: regulate humidity levels by
controlling air and water temperatures, System
allows for humidity level to 95%
Solid state controls provide the highest degree of accuracy and
reliability, prepared foods are held at a consistent serving temperature
Fully insulated cabinet prevents heat loss and keeps foods hot and ready
to serve, side air tunnel system circulates air evenly throughout the
cabinet with minimal heat loss when doors are opened
Completely removable interior components for quick and easy cleaning
Welded wire pan supports accept a variety of pans and screens
All stainless steel & aluminum construction
Heavy-duty plate-type casters with 5" hardneoprene wheels, front two
with brakes
Heavy duty field reversible doors with self closing lift off hinges and
magnetic latches
Magnetic door gaskets
Recessed stainless steel side mounted (front and rear) pull grips
provide easy mobility
120V, 15A, 1PH service standard NEMA 5-15P
Bevles HCSS44W61 Specifications
Construction, Casters and Heating Module
Exterior 20 ga 304 #3 finish stainless steel
Interior 22 ga 304 2B finish stainless steel
Exterior door panel 20 ga 304 #3 stainless steel
Interior door panel 22 ga 400 BA finish stainless steel
Internal framework 18 ga 304 stainless steel
Full insulated doors, back, sides, top and base
Latch Heavy duty magnetic door latch with cool-totouch handle and turn
knob lock
Hinges Heavy duty lift off self-closing, chrome plated
Door Gasket Magnetic NSF approved Santoprene
Base: .125 Formed aluminum with welded corners
Side air ducts 22 ga 304 2B Stainless steel
Pan Supports welded wire 304 stainless steel pan supports adjustable on
1.50"centers
Top mounted dual coil heating unit , heating elements rated at 600 watts
@120v, or 1000 watts @ 208-230v
(4) Gal. Water pan with separate 750 watt heating element
Easy to operate controls feature 20 amp rated rocker switch, and pilot
light, precision variable thermostat, 2" dial thermometer
Cord and Plug: 8' cord with 15A molded plug (NEMA 5-15P); 208/230 volt
models provided with cord only
Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel,
with wheel brakes on front two casters
Bevles HCSS44W61 Options and Accessories
Left hand door hinging
Stainless steel push handles
Magnetic latch with key lock
Corner bumpers of gray non-marking vinyl (set of 4)
Perimeter bumper of gray non-marking vinyl
Additional universal pan supports
6" stainless steel legs with adjustable feet for stationary floor
installation*
6" casters with soft rubber wheels
18" x 26" chrome electroplated wire racks
208-230-50/60Hz electrical service
* Note: Modifications involving casters or legs may affect the height of
the equipment. Specifications subject to change without notice
The image above may not exactly represent the product
