The Bevles HTSS74W124 Temper Select Heated Holding Cabinet
Why Use Bevles Heated Holding Cabinet?
Temper Select cabinets are constructed of stainless steel inside-and-out,
and feature fully insulated top, side, and doors. Top mounted convection
heating system produces uniform temperature distribution down both sides
and features solid state controls with a temperature range of 70° to 215°F
(21° to 102°C). Standard features include field reversible, lift-off,
self-closing hinges, magnetic door gasket and latch, cool-touch handles
and turn-knob locking device, radius corners, front and rear pull grips,
heavy-duty plate casters with 5” (127mm.) rubber wheels and water pan for
added moisture. Options include left or right hand hinges, 120v, or
208/230v 15 amp service and more. "P" models have solid non-adjustable
racks that can be used on 1.5" spacing. "W" models have universal
adjustable wire pan supports that can be adjusted on 1.5" centers.
Bevles HTSS74W124 Features
Temperature adjustable from 60°F (15.6°C) to 215°F (102°C) for heating
and holding a variety of foods
Top mounted convection heat and humidity system maintains even cabinet
temperatures and ensures quick pre-heating and rapid recovery
Solid state controls provide the highest degree of accuracy and
reliability, prepared foods are held at a consistent serving temperature
Fully insulated cabinet prevents heat loss and keeps foods hot and ready
to serve, side air tunnel system circulates air evenly throughout the
cabinet with minimal heat loss when doors are opened
Removable top water pan provides additional humidity for hard to hold
items
Completely removable interior components for quick and easy cleaning
Welded wire pan supports accept a variety of pans and screens
All stainless steel & aluminum construction
Heavy-duty plate-type casters with 5" hardneoprene wheels, front two
with brakes
Heavy duty field reversible doors with self closing lift off hinges and
magnetic latches
Magnetic door gaskets
Recessed stainless steel side mounted (front and rear) pull grips
provide easy mobility
120V, 15A, 1PH service standard NEMA 5-15P
Bevles HTSS74W124 Specifications
Construction, Casters and Heating Module
Exterior 20 ga 304 #3 finish stainless steel
Interior 22 ga 304 2B finish stainless steel
Exterior door panel 20 ga 304 #3 stainless steel
Interior door panel 22 ga 400 BA finish stainless steel
Internal framework 18 ga 304 stainless steel
Full insulated doors, back, sides, top and base
Latch Heavy duty magnetic door latch with cool-totouch handle and turn
knob lock
Hinges Heavy duty lift off self-closing, chrome plated
Door Gasket Magnetic NSF approved Santoprene
Base: .125 Formed aluminum with welded corners
Side air ducts 22 ga 304 2B Stainless steel
Pan Supports welded wire 304 stainless steel pan supports adjustable on
1.50"centers
Top mounted dual coil heating unit , heating elements rated at 600 watts
@120v, or 1000 watts @ 208-230v
Easy to operate controls feature 20 amp rated rocker switch, and pilot
light, precision variable thermostat, 2" dial thermometer
Cord and Plug: 8' cord with 15A molded plug (NEMA 5-15P); 208/230 volt
models provided with cord only
Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel,
with wheel brakes on front two casters
Bevles HTSS74W124 Options and Accessories
Left hand door hinging
Stainless steel push handles
Magnetic latch with key lock
Corner bumpers of gray non-marking vinyl (set of 4)
Perimeter bumper of gray non-marking vinyl
Additional universal pan supports
6" stainless steel legs with adjustable feet for stationary floor
installation*
6" casters with soft rubber wheels
18" x 26" chrome electroplated wire racks
208-230-50/60Hz electrical service
* Note: Modifications involving casters or legs may affect the height of
the equipment. Specifications subject to change without notice
From The Manufacturer
Temper Select Humidity Controlled Heated Holding Cabinet, mobile, full height, fully insulated, (2) solid dutch doors, universal width, solid state controls, 70° to 215°F temperature range, adjustable welded wire pan supports on 1-1/2" centers accommodate (12) 18" x 26" or (24) 12" x 20" pans, removable top water pan, 5" swivel plate casters (2 with brakes) stainless steel & aluminum construction, 208/230v/50/60/1-ph, 2000 watts, 9.7/8.7 amps, cord only, cULus, NSF
The image above may not exactly represent the product
