BevLes PHC32-10-A-4R1 Under Counter Non-Insulated Proofing & Holding Cabinet, Right Hinged, 1 Door, 230V

Why Use Bevles Proofing Cabinet?

BevLes Combination Holding & Proofing cabinets are all aluminum construction and are available in insulated and non-insulated models. Universal extruded pan supports accommodate a wide variety of pans and screens while see-through Lexan doors with heavy-duty hinges feature positive closing latches and full perimeter gaskets.User-friendly, bottom-mounted controls feature independent heat and humidity adjustment. Temperatures range from 80° to 180°F (27° to 82°C) and the water reservoir holds up to 5 quarts (4.7 liters). Bevles "cast-in" humidity system prevents element burnout while providing added safety for the operator. All BevLes proofing and holding cabinets have a self-draining feature for excess moisture collection below the cabinet base into a standard 18"x26" bun pan - pan not included. Heavy-duty swivel-type plate casters with 5" (127mm.) rubber wheels, two with locks, provided.

Bevles PHC32-10-A-4R1 Features

• Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of the cabinet
• "Cast-in" humidity system prevents element burnout from water spills and potential injury from accidental contact with exposed heating element
• All aluminum construction
• Extruded pan supports accept a variety of pans and screens
• Removable heating module with separate controls for heat and humidity
• Maintains uniform temperature and humidity throughout cabinet
• Temperature adjustable from 60°F (15.6°C) to 180°F (82.2°C)
• Completely removable interior components for quick and easy cleaning
• Heavy-duty plate-type casters with 3" hardneoprene wheels, front two with brakes
• 120V, 20A, 1PH service

Bevles PHC32-10-A-4R1 Specifications

Cabinet, Casters and Electrical

• Body: .063 Formed aluminum
• Door: Clear Lexan® with an extruded aluminum frame
• Door Latch and Hinges: Positive action door latch with heavy-duty stainless steel hinges
• Door Gasket: Closed cell foam
• Base: .125 Formed aluminum
• Rear (Air Duct) Panel: .063 Formed aluminum
• 20 Amp Switch, and pilot light
• Pan Supports: Aluminum pan supports adjustable on 1.50"centers
• Cord and Plug: 8' cord with 20A molded plug (NEMA 5-20); 208/230 volt models provided with cord only
• Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel, with wheel brakes on front two casters

Heating Module and Controls

• Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly, easily removable for maintenance and cleaning
• Air heating element rated at 1000watts
• Humidity heating element rated at 400 watts
• 5 quart (4.7 liter) cast waterreservoir
• Lexan® water reservoir cover
• Easy to operate controls feature digital thermostat, variable humidity control and LED display
• All controls are visible and operable from exterior of cabinet

Bevles PHC32-10-A-4R1 Options and Accessories

• Door hinging
• Solid doors
• Corner bumpers of gray non-marking vinyl (set of 4)
• Additional extruded universal pan supports
• Perimeter bumper of gray non-marking vinyl
• 6" stainless steel legs with adjustable feet for stationary floor installation*
• 5" casters with hard neoprene or polyurethane wheels
• 18" x 26" chrome electroplated wire racks

* Note: Modifications involving casters or legs may affect the height of the equipment. Specifications subject to change without notice

From The Manufacturer

Proofing & Holding Cabinet, mobile, undercounter, non-insulated, (1) clear Lexan® right-hand hinged door, digital thermostat, variable humidity control & LED display, 80° to 180°F temperature range, adjustable aluminum pan supports on 1-1/2" centers accommodate (5) 18" x 26" or (10) 12" x 20" pans, removable heating module, 5 qt. cast water reservoir with cover, 3" swivel plate casters (2 with brakes), aluminum construction, 208-230v/50/60/1-ph, 2000 watts, 9.7/8.7 amps, cord only, cULus, NSF