BevLes PICA70-32INS-A-1R1 Full Size Insulated Proofing Cabinet, Right Hinged, 1 Door, 115V

Brand	BevLes Company
Model Number	PICA70-32INS-A-1R1
Weight	295 lbs
Width	29"
Depth	33.5"
Height	71.5"
Load Type	reach-in
Placement	mobile
Cabinet Size	full height
Design Features	proofing holding cabinet
Sections	1 section w/1 compartment
Proofer Doors	clear lexan right - hand hinged door
Number of Doors	1 door
Control Type	digital control
Interior configuration	adjustable slides
Control Location	bottom
Insulation	insulated
Slide Spacing (in)	1-1/2"
Interior Finish	aluminum
Exterior Finish	aluminum
Voltage	120
Phase	1

The Bevles PICA70-32INS-A-1R1 Proofing Cabinet Insulated

Why Use Bevles Proofing Cabinet?

BevLes Proofing cabinets are all aluminum construction and are available in insulated and non-insulated models. Universal extruded pan supports accommodate a wide variety of pans and screens while see-through Lexan doors with heavy-duty hinges feature positive closing latches and full perimeter gaskets. User-friendly, bottom mounted controls feature independent heat and humidity adjustment. Bevles "cast-in" humidity system prevents element burnout while providing added safety for the operator. All BevLes proofing cabinets have a self-draining feature for excess moisture collection below the cabinet base into a standard 18"x26" bun pan - pan not included. Heavy-duty swivel-type casters with 5" (127mm.) rubber wheels, two with locks, provided.

The Bevles PICA70-32INS-A-1R1 Proofing Cabinet Insulated, Chef's Deal

Bevles PICA70-32INS-A-1R1 Features

Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of the cabinet
"Cast-in" humidity system prevents element burnout from water spills and potential injury from accidental contact with exposed heating element
All aluminum construction
Insulated top, sides and back
Extruded pan supports accept a variety of pans and screens
Removable heating module with separate controls for heat and humidity
Maintains uniform temperature and humidity throughout cabinet
Temperature adjustable from 60°F (15.6°C) to 120°F (48.9°C)
Completely removable interior components for quick and easy cleaning
Heavy-duty plate-type casters with 5" hardneoprene wheels, front two with brakes
120V, 15A, 1PH service

Bevles PICA70-32INS-A-1R1 Specifications

Cabinet, Casters and Electrical

Body: .063 Formed aluminum
1.50" Thick insulation Top, back, and sides
Door: Clear Lexan® with an extruded aluminum frame
Door Latch and Hinges: Positive action door latch with heavy-duty stainless steel hinges
Door Gasket: Closed cell foam
Base: .125 Formed aluminum
Rear (Air Duct) Panel: .063 Formed aluminum
20 Amp Switch, and pilot light
Pan Supports: Aluminum pan supports adjustable on 1.50"centers
Cord and Plug: 8' cord with 15A molded plug (NEMA 5-15); 208/230 volt models provided with cord only
Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel, with wheel brakes on front two casters

Heating Module and Controls

Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly, easily removable for maintenance and cleaning
Air heating element rated at 1000watts
Humidity heating element rated at 400 watts
5 quart (4.7 liter) cast waterreservoir
Lexan® water reservoir cover
Easy to operate controls feature digital thermostat, variable humidity control and LED display
All controls are visible and operable from exterior of cabinet

Bevles PICA70-32INS-A-1R1 Options and Accessories

Door hinging
Solid doors
Dutch doors (2)
Corner bumpers of gray non-marking vinyl (set of 4)
Additional extruded universal pan supports
Perimeter bumper of gray non-marking vinyl
6" stainless steel legs with adjustable feet for stationary floor installation*
3" casters with hard neoprene or polyurethane wheels
18" x 26" chrome electroplated wire racks

* Note: Modifications involving casters or legs may affect the height of the equipment. Specifications subject to change without notice

From The Manufacturer

Proofing Cabinet, mobile (donut proofer), full height, insulated top, back & sides, (1) clear Lexan® right-hand hinged door, digital thermostat, variable humidity control & LED display, 60° to 120°F temperature range, adjustable aluminum pan supports on 1-1/2" centers accommodate (16) 18" x 26", or (16) 23" x 23" donut screens, or (32) 12" x 20" pans, removable heating module, 5 qt. cast water reservoir with cover, 5" swivel plate casters (2 with brakes), aluminum construction, 120v/60/1-ph, 1400 watts, 13 amps, 8' cord & NEMA 5-15P, cULus, NSF

Reviews

BevLes PICA70-32INS-A-1R1 Full Size Insulated Proofing Cabinet, (1) Right Hand Hinged Door, 115V