Captive Aire 14' L 430 Stainless Steel Make-Up Air Hood (Complete) with 3 Fans and Optional Fire System

Commercial Hood #1 - H1

5424ND-2-PSP-F - 14ft  0" Long Exhaust-Only Wall Canopy Commercial Hood with Front Perforated Supply Plenum with Built-in 3" Back Standoff

x1

 - 1/2 Pint Grease Cup New Style, Flanged Slotted

x2

 - BACKSPLASH   80.00"  High  X  168.00"  Long    430 SS  Vertical (Includes End Caps & Divider Bars)

 - SUPPLY RISER - 12"x 28" Supply Riser with Volume Dampers

x3

 - EXHAUST RISER -  Factory installed  14" Diameter

x2

 - L55 Series E26 Canopy Light Fixture - High Temp Assembly, Includes Clear Thermal and Shock Resistant Globe (L55 Fixture), Bulbs By Others

x4

 - FILTER - 16" tall x 16" wide Kleen-Gard Stainless Steel Baffle Filter with Handles and Bottom Hanging Hook, UL Classified

x10

 - 430 SS Where Exposed

x1

Fire System #1  *FINAL HOOK UP, TESTS and PERMITS NOT INCLUDED*
OPTIONAL - Please select it before adding to cart 

ANSUL-3.0/3.0 Ansul 6 gallon Wall Mounted Fire System (includes pre-piped hood(s) and detection).

x1

 - GAS VALVE - 2" Mechanical Shutoff Valve (Ansul)(28-55610) - Includes Upstream Strainer assembly; SUPPLIED BY DISTRIBUTOR

x1

Fan #1 NCA16FA - Exhaust Fan (EF1)

NCA16FA Belt Drive Centrifugal Upblast Exhaust Hood Fan with 18.75" wheel

Exhaust Fan handles 3220 CFM @ -1.250" wc ESP,  Fan runs at 1175 RPM.

Exhaust Motor: 1.500 HP, 1 Phase 115 V, 60Hz, 20.4 FLA, ODP (Open Drip Proof)

x1

 - Grease Cup for kitchen-duty centrifugal exhaust fans,

Box Dimensions 15-3/4 L X 5-1/16 W X 3-3/4 H (18 GA.) (Includes Down Spout)

x1

 - Vented Base for Curb

x1

 - Hinged Base for Curb.  Standard Hinge attached to curb.  Used on Fans with wheels 20 inches or smaller.  12 GA Galvanized.

x1

 - EF1 Curb CRB26.5x26E On Fan # 1 Flat Curb

x1

Fan #2 A1-G10 - Supply Fan (SF1)

A1-G10 Direct Drive Direct Drive Untempered Supply Unit with 10" Blower in Size #1 Housing with speed control, disconnect switch.

Supply Fan handles 2332 CFM @ 0.400" wc ESP,  Fan runs at 936 RPM.

Supply Motor: 1.000 HP, 1 Phase 115 V, 60Hz, 10.2 FLA, ODP-ECM (Open Drip Proof Electronically Commutated Motor)

Down Discharge - Air Flow Right -> Left

x1

 - ECM Wiring Package and Manual Control for ECM motors on PRVs.

x1

 - Sloped Filtered Intake for Size #1 Modular Untempered Supply Unit.

21.813" Wide x 44.375" Long x 23.375" High.  

Includes 2" MV EZ Kleen Metal Mesh Filters.

x1

 - SF1 Curb CRB21X20 On Fan # 2 Flat Curb

x1

Electrical System #1 - ECP1
OPTIONAL - Please select it before adding to cart 

SC-121110FP 120V 1 Phase w/ control for 2 Exhaust Fans, 1 Supply Fan, Exhaust on in Fire, Lights out in Fire, Fan(s) On/Off Thermostatically Controlled.  Room temperature sensor shipped loose for field installation.  Includes 2 Duct Thermostat kits.

x1

 - 14x18 Stainless Steel Box. Includes latch and backplate

x1

 - Digital Prewire Lighting Relay Kit.  Includes hood lighting relay & terminal blocks.  Allows for up to 1400W of lighting each.

x1

 - Thermistor CABLE - 18/2 AWG  GREEN WHITE, plenum rated. USED for thermistor duct stat. Per Foot Price.

x50