Resources
Brand | Carter-Hoffmann |
---|---|
Model Number | CW2E |
Weight | 135 lbs |
Width | 22.75" |
Depth | 23" |
Height | 38.75" |
First-in, first-out product rotation reduces breakage and assures that the freshest, warmest chips are served. Gentle, even heating—our exclusive heat duct and baffle system forces air down rear wall duct and up through the chips. Hot spots, cold spots, cold chips and burned chips are eliminated. These handy warmers can also be used for kettle chips and even baked potatoes! Three models, sized to suit different operational volumes.
Heating system located in top of cabinet with blower for quick heat up and recovery and even heat distribution throughout cabinet. Thermostat for optimal holding temperature located on rear of cabinet; accessible & adjustable with tools to prevent easy tampering. Heater lifts off for easy cleaning and service.
Provides ample supply of product, even during peak rush periods. Approximatey 44 gallons in CW4E and 22 gallons in CW2E.
In addition to tortilla chips, these warmers are ideal for kettle chips and even foil-wrapped baked potatoes!
Facilitates constant product rotation to ensure freshness.
All stainless steel exterior for easy sanitation and long lasting clean appearance.
Provide a barrier on each side to reduce spillage and food waste during service
Warm air is directed through duct in back of cabinet and up through chips on the bottom. Assures uniform temperatures throughout cabinet for consistent holding of product.
Catches broken chips and crumbs. Easily removed without tools for cleaning. Standard steam table size is easily replaceable.
Completely welded cabinet construction with outer cabinet welded to cabinet liner. Extended side panels reduce chip spillage.
All stainless steel construction
Standard 12”x20”x2.5” stainless steel pan, mounted on bottom of unit to catch crumbs. Slides out for easy cleaning.
Top mounted lift off forced air heating system. Incoloysheathed heating elements, heavy duty fan motor. Air forced through rear duct and up through bottom chip grates. Duct and grates removable for cleaning.
Internal mechanical thermostat. Factory pre-set temperature of 175 o F (79 o C). Adjustable with tools via access hole with grommet; located on rear of heating unit. On/off switch with power indicating light.
CW2E & CW4E operate on 1530 watts, 12.6 amps, 60 cycle, single phase. Six foot 3 wire rubber cord with 3 prong grounding plug. NEMA 5-15P.
.Integral and continuous rolled butt type hinges. Removable stainless steel full length pin.
Bottom door and product loading door feature integrally formed, full width stainless steel handles.
High density fiberglass, full 1” thick continuous wrap-around type in top, bottom and sides.
16 gauge single panel polished stainless steel.