Carter-Hoffmann PH1830 Mobile Heated Cabinet, (32) 12"x20" or (16) 18"x26" Pans, Insulated
CRM-PH1830
| Brand | Carter-Hoffmann |
|---|---|
| Model Number | PH1830 |
| Weight | 425 lbs |
| Width | 30.63" |
| Depth | 36" |
| Height | 71" |
| Door Type | solid |
| Size | 1 compartment |
| Exterior Finish | all stainless steel exterior |
| Height | 67" - 72" |
| Door Style | full door(s) |
| Heater | bottom mounted |
| Slide Centers | adjustable on 1-3/4" |
| Insulation | insulated |
| Section | 1 section |
Move your feast with heated carts for bulk foods in pans. Great for transport and holding at buffets and remote serving locations.They are constructed of sanitary stainless steel and feature a bottom-mounted lift-out heating system with dial controls and blower heat for even air flow throughout the cabinet. Transport features include wrap-around bumper, wheel-ahead caster pattern and insulated turned-in seam construction.
Exclusively designed for transport applications. Door remains closed during transport. Flush design protects latch from damage
Outer cabinet formed and welded to base. All seams turned in the eliminate raw edges. Adds rigidity to entire cabinet.
12 gauge caster bosters with 1”x1” stainless steel perimeter channel supports to withstand heavy loads and harsh transport conditions
Set in heavy-duty 3/16” thick extruded aluminum frame with reinforced corner cut-outs. Protects doorways, walls and cart from damage.
Long lasting, easy rolling for maximum load and minimum maintenance.
Blower heating system with side mounted interior heat ducts for fast heat up, recovery and even heat distribution throughout cabinet. Removable without tools for easy maintenance and cleaning
Heavy-duty stainless steel slides are adjustable on 1- 3/4” centers (standard spacing at 3-1/2”. Accommodate 12”x20” steam table pans, 18”x26” sheet pans, 1/1 and 2/1 gastronorm pans, and 20”x20” glass racks
Only one wheel can pass over uneven surfaces at a time for easy handling and steering.
PH181, PH1810, PH1830, PH1860: 5” & 6” diameter polyurethane tread. All swivel on PH185, PH181, PH1820 and PH1830. Two swivel and two rigid on PH1860. Sealed roller bearing and double ball bearing swivel. Zerk grease fittings. Plated mounted and bolted to base in offset wheel-ahead pattern. Two casters fitted with brakes
Completely welded cabinet construction and top corners, with outer cabinet formed to base and welded. All seams turned in to eliminate raw edges
12 gauge stainless steel full depth bolsters with 1”x1” 14 gauge stainless steel perimeter tube supports welded to bolsters
All stainless steel construction; 20 gauge polished exterior and 24 gauge interior.
Bottom-mounted, all stainless steel construction. Removable without tools.1600 watt inconel-sheathed heating element. High impedence protected, internally cooled fan motor. Full range thermostat, remote sensing bulb & power indicating light
16 gauge universal slides, fully adjustable at 1 3/4” spacing, placed into 18 gauge stainless steel rack post. Standard spacing at 3 1/2”.
Double panel welded stainless steel with heavy-duty vinyl gasket. 20 gauge polished exterior and 24gauge interior. Filled with 1” thick high density fiberglass insulation
Flush mounted heavy-duty sliding latch for positive closing of door. Easy grip handle bolted to door
Dial type with remote sensing bulb. Located on side of cabinet. Protected by lexan thermometer cover.
Capable of heating to 200O F (94O C). Preheat to 160O F (71O C) in approximately 25 minutes.
High density fiberglass, full 1” thick continuous wrap-around type insulation
Concealed, stainless steel hinge with 5/15” pin. 180 degree door swing
Operates on 120 volts, 60 cycle, single phase, 1650 watts, 13.7 amps. Ten foot 3 wire rubber cord with 3 prong grounding plug. NEMA 5-15P.
The image above may not exactly represent the product
