The Cleveland KET6T Steam Jacketed Table Type Electric Kettles
Why Use Cleveland Steam Jacketed Kettles?
Cleveland steam jacketed kettles offer ultra efficient heat transfer,
uniform heating and superior product handling. Steam jacketed kettles
offer faster cooking times because two thirds of the cooking surface comes
into contact with the product at a much lower temperature, compared to
stock pots that use a much higher temperature only at the bottom of the
pot. In addition, accurate temperature controls eliminate constant
monitoring and resetting. Foods won’t burn or scorch and you can hold
product at a simmer without over cooking. Tilting models makes product
handling simple. Clean up is easy since food isn’t burned or over cooked
like stock pots. Ideal For: Soups, delicate sauces, pasta, gravies,
desserts,stews, braising meats, rice, reheating dishes and holding them
Increases Quality and Productivity
Heats from all sides and has 3-4 times larger heat surface than stock
Gentle uniform cooking.
Faster cooking times using high energy steam.
Precision temperature controls from a simmer to a boil.
No hot spots
Eliminates pot watching, constant stirring and large stock pots.
Improves Operator's Profits By
Reduces food waste due to over cooking and burning.
Reheat meals without over cooking.
Simmer food all day without over cooking.
Simplifies and standardizes recipe and enhances recipe development.
Improves Worker Safety
Tilting models make pouring safe.
Eliminates heavy lifting and carrying hot stock pots.
Saves Energy and Time
Kettles use 35% less energy than stock pots on an open burner.
Keeps kitchens cooler.
Eliminates scrubbing of messy stock pots.
Butterfly shaped pouring lip accurately pours product into containers
Cleveland KET6T Standard Features
Manual tilting, balanced design
Self-contained, easily installed - needs only an electrical hook-up
Steam jacket filled with treated water, venting and/or refilling is not
Accurate, consistant solid state temperature controls (mechanical
thermostat not as accurate) - less than ±1°C variance (ideal for
simmering). Operating temperature range from 145° - 260°F (63°C - 127°C)
Control panel includes:
LED indicator for heat cycle
LED indicator for low water
Power ON/OFF Dial with 1-10 Temperature Dial Setting
Easily cleaned: kettle and all exterior surfaces are of type 304
stainless steel with an #4 finish
Anti drip notch Large pouring lip for high capacity and chunky
Rear mounted easy access pressure gauge and pressure relief valve to
prevent tampering.Color coded easy to read pressure gauge with "green"
and "vent air zone"
IXP6 rated water resistant
Large pouring lip for high capacity and chunky products
Re-inforced rolled rim design prevents damage to kettle rim, eliminates
"bar rim designs"
50 psi steam jacket rating for higher cooking temperatures
Solid state water level control (no sight glass gauge to break or leak)
Splash proof element cover with a double gasket seal
Self locking marine type tilting mechanism prevents accidental
spills. Balanced design makes it easy to tilt. (KET-6-T & KET-12-T only)
Standard voltage is 208-240 volts, 60 Hz, 3 phase, 3 wire. Model
KET-6 and KET-12 are field rewirable to single phase
Typical approvals include UL., CSA, CE, NSF, ASME and IXP6
Cleveland KET6T Optional Features
Hot and cold (DPK) or cold only (SPK) water faucet with swing
spout. Requires mounting bracket (FBKT)
Stainless Steel equipment stand with drain drawer and splash
Core Temperature Probe Option
Food Strainers (FS)
Cooking Baskets (BS)
Lift Off Cover (CL)
Protective Control Panel (PCE)
Measuring Strip (MS)
Spray Hose (PRS-K)
Kettle Markings (KM)
High Wattage (HW) (see back page)
Special Voltages (see back page)
Optional Gear Box (models -TGB)
Cleveland KET6T Specification
CLEVELAND, electric Steam kettle (boiling pan), Table Type, self-contained, tilting. 2/3 steam jacketed, type 304 Stainless Steel kettle and supports. Jacket rated at 50 psi (3.5 Bar) with Safety Valve, Permanently filled Steam Jacket, Splash Proof Solid State Temperature (±1° C) and Safety Control System in plug-in Module including L.E.D. indicators. Marine Lock. Optional Lift Off Cover, Hot & Cold Water Faucet and ST 28 Equipment Stand