Cleveland KGL25T Tilting Gas Kettle

Cleveland KGL25T Tilting Gas Kettle

CLV-KGL25T
Details

Cleveland KGL25T Tilting Gas Kettle

SKU CLV-KGL25T
Disclosure The image above may not exactly represent the product

$36,426.00

Call or Chat Call or Chat


Kettle, gas, manual tilting, 25-gallon capacity, 2/3 steam jacket design, electronic spark ignition, solid-state control panel, floor mounted control console supports, 304 stainless steel construction with 316 series stainless steel liner, flanged feet, 50 psi rating, cover & draw-off optional, 90,000 BTU

Resources

Product PDF

Cleveland KGL25T Specs

Brand Cleveland
Model Number KGL25T
Weight 320 lbs
Width 42"
Height 42.63"
Depth 41"
Capacity 18 - 26 gallon
Kettle Liner 304 stainless steel
Kettle Jacket partial jacket

The Cleveland KGL25T Steam Jacketed Gas-Fired Kettles

Why Use Cleveland Steam Jacketed Kettles?

Cleveland steam jacketed kettles offer ultra efficient heat transfer, uniform heating and superior product handling. Steam jacketed kettles offer faster cooking times because two thirds of the cooking surface comes into contact with the product at a much lower temperature, compared to stock pots that use a much higher temperature only at the bottom of the pot. In addition, accurate temperature controls eliminate constant monitoring and resetting. Foods won’t burn or scorch and you can hold product at a simmer without over cooking. Tilting models makes product handling simple. Clean up is easy since food isn’t burned or over cooked like stock pots. Ideal For: Soups, delicate sauces, pasta, gravies, desserts,stews, braising meats, rice, reheating dishes and holding them until serving.

Increases Quality and Productivity

  • Heats from all sides and has 3-4 times larger heat surface than stock pots
  • Gentle uniform cooking.
  • Faster cooking times using high energy steam.
  • Precision temperature controls from a simmer to a boil.
  • No hot spots

Improves Operator's Profits By

  • Reduces food waste due to over cooking and burning.
  • Reheat meals without over cooking.
  • Simmer food all day without over cooking.
  • Simplifies and standardizes recipe and enhances recipe development.

Improves Worker Safety

  • Tilting models make pouring safe.
  • Eliminates heavy lifting and carrying hot stock pots.

Saves Energy and Time

  • Kettles use 35% less energy than stock pots on an open burner.
  • Keeps kitchens cooler.
  • Eliminates scrubbing of messy stock pots.
  • Butterfly shaped pouring lip accurately pours product into containers for serving.

Cleveland KGL25T Standard Features

  • Self-contained gas stationary kettle is easily installed, only needs a gas connection and a 115 volt outlet.
  • Precise, consistent temperature control, less than 1ºC temperature variance (ideal for simmering). Operating temperature range from 145ºF-260ºF (63ºC-127ºC).
  • "Splash-Proof" Solid-State Control Panel for temperature, Low Water Safety, and Power "On/Off" Switch. Accurate L.E.D. Indicators for Heat Cycle and Low Water Warning.
  • Kettle and all exterior surfaces are a 304 Stainless Steel with a #4 finish.
  • Energy efficient (65%), high performance gas-fired heating system for fast heat-up and recovery time: Twenty-five gallon model with 90,000 BTU firing rate and 58,500 BTU directly applied to the product.
  • Twenty-five gallon model with 90,000 BTU firing rate and 58,500 BTU directly applied to the product.
  • Steam jacket permanently filled with treated distilled water; venting and/or refilling is not required.
  • 50 psi Steam Jacket Rating. Safety Valve mounted toward rear of kettle to avoid tampering.
  • Supplied with Gas Pressure Regulator.
  • Standard for natural gas operation.
  • Heavy-duty Rolled Rim design provides strong reinforcement, prevents damages from abuse.
  • Large pouring lip for easier, faster, pouring. Heavy-duty Rolled Rim design provides strong reinforcement, prevents damages from abuse.
  • "Splash-Proof" rear-mounted pressure/vacuum gauge.
  • Automatic Electronic Spark Ignition System.
  • Supplied with cord and plug for 115 volt controls.
  • Support Legs with level adjustable feet, flanged for floor bolting.
  • Tilt Mechanism of roller bearings and case hardened self-locking worm and segment gear.
  • Typical approvals include AGA, CSA, CE, NSF and ASME.

Cleveland KGL25T Optional Features

  • 316 Stainless Steel Liner (316)
  • Propane Gas Option (LP)
  • Kettle Markings (KM)
  • Lift Off Cover (CL)
  • Basket Strainer (BS and TBS)
  • Measuring Strip (MS)
  • Food Strainer (FS)
  • Hot and cold water faucet (DPK), or cold water (SPK).
  • Correctional Packages

Cleveland KGL25T Specification

Shall be CLEVELAND, Gas Kettle, self-contained, tilting, Model KGL-25-T; 25 gallons, natural or LP gas, 2/3 Steam Jacketed, Type 304 Stainless Steel and supports. Jacket rated at 50psi with Safety Valve. Complete with "Splash-Proof" Solid-State Water Level, Temperature, and Safety Low Water Power Cut-Off, including L.E.D. Indicators for Heat Cycle and Low Water Warning.

Write Your Own Review
You're reviewing:Cleveland KGL25T Tilting Gas Kettle
Your Rating