The Cleveland KGT6T Steam Jacketed Gas-Fired Kettles
Why Use Cleveland Steam Jacketed Kettles?
Cleveland steam jacketed kettles offer ultra efficient heat transfer,
uniform heating and superior product handling. Steam jacketed kettles
offer faster cooking times because two thirds of the cooking surface comes
into contact with the product at a much lower temperature, compared to
stock pots that use a much higher temperature only at the bottom of the
pot. In addition, accurate temperature controls eliminate constant
monitoring and resetting. Foods won’t burn or scorch and you can hold
product at a simmer without over cooking. Tilting models makes product
handling simple. Clean up is easy since food isn’t burned or over cooked
like stock pots. Ideal For: Soups, delicate sauces, pasta, gravies,
desserts,stews, braising meats, rice, reheating dishes and holding them
until serving.
Increases Quality and Productivity
Heats from all sides and has 3-4 times larger heat surface than stock
pots
Gentle uniform cooking.
Faster cooking times using high energy steam.
Precision temperature controls from a simmer to a boil.
No hot spots
Eliminates pot watching, constant stirring and large stock pots.
Improves Operator's Profits By
Reduces food waste due to over cooking and burning.
Reheat meals without over cooking.
Simmer food all day without over cooking.
Simplifies and standardizes recipe and enhances recipe development.
Improves Worker Safety
Tilting models make pouring safe.
Eliminates heavy lifting and carrying hot stock pots.
Saves Energy and Time
Kettles use 35% less energy than stock pots on an open burner.
Keeps kitchens cooler.
Eliminates scrubbing of messy stock pots.
Butterfly shaped pouring lip accurately pours product into containers
for serving.
Cleveland KGT6T Standard Features
Self contained gas tilting kettle is easily installed, only needs a
gas connection and a 115 volt outlet.
Precise, consistent temperature control, less than 1°C
temperature variance (ideal for simmering). Operating
temperature range from 145°- 260°F (63°C-127°C).
“Splash Proof” solid state control panel for temperature, low
water safety, and power “on/off” switch. Accurate L.E.D.
indicators for heat cycle and low water warning.
Kettle and all exterior surfaces are a 304 Stainless Steel with a
#4 finish.
Automatic Ignition System
Solid State Controls, for Temperature and Low Water Safety, in a plugin
Control Module
Energy efficient (65%), high performance gas-fired heating
system for fast heat up and recovery time:
Six gallon model with a 34,000 BTU firing rate, and 22,100
BTU directly applied to the product.
Twelve gallon model with a 53,000 BTU firing rate, and
34,450 BTU directly applied to the product.
Supplied with Gas Pressure Regulator.
Standard for natural gas operation.
Self locking marine type tilting mechanism prevents accidental
tilting. Balanced design makes it easy to tilt. The tilt handle
easily mounts on left or right side. Double safety gas shut off
turns off the gas when the unit is tilted.
Large pouring lip for easier, faster pouring. Heavy duty Rolled
Rim design provides strong reinforcement, prevents damages
from abuse
“Splash Proof” pressure/vacuum gauge
Steam jacket permanently filled with treated distilled water,
venting and / or refilling is not required.
50 PSI Steam Jacket Rating. Safety valve mounted toward rear
of kettle to avoid tampering.
Automatic Electronic Spark Ignition System
Supplied with cord and plug for 115 volt controls
Typical approvals include AGA, CSA, CE, NSF and ASME
Cleveland KGT6T Optional Features
Stainless Steel equipment stand with sliding drain drawer and splash shield (ST-28)
Hot and cold water faucet (DPK), or Cold Water (SPK). Requires bracket (FBKT)
316 Stainless Steel Liner (316G)
Cooking Baskets (BS)
Food Strainers (FS)
Measuring Strips (MS)
Spray Hose (PRS-K)
Lift Off Cover (CL)
Propane Gas Operation (PG)
Kettle Markings (KM)
Protective Control Panel (PCE)
Cleveland KGT6T Specification
CLEVELAND, gas kettle, Table Type, self-contained, tilting, natural or LP gas, 2/3 steam jacketed, type 304 Stainless Steel and supports. Jacket rated at 50 psi with Safety Valve. Complete with solid state water level, temperature, and safety low water power cut off, including LED indicators. Option lift off cover.