Cleveland SD450K6 Direct-Steam Kettle Cabinet Assembly

Cleveland SD450K6 Direct-Steam Kettle Cabinet Assembly

CLV-SD450K6
Details

Cleveland SD450K6 Direct-Steam Kettle Cabinet Assembly

SKU CLV-SD450K6
Disclosure The image above may not exactly represent the product

$16,693.00

Call or Chat Call or Chat


Kettle/Cabinet Assembly, direct-steam, 18" W cabinet base, with one 6-gallon kettle, low cabinet height, stainless steel kettle, top, front & sides, lift-off cover, double pantry faucet, sliding drain pan with splash shield, 316 stainless steel liner, factory installed steam control kit

Resources

Product PDF

Cleveland SD450K6 Specs

Brand Cleveland
Model Number SD450K6
Weight 140 lbs
Base 18" wide cabinet
Kettle Liner stainless steel

The Cleveland SD450K6 Stand Mounted Direct Steam Kettles

Why Use Cleveland Steam Jacketed Kettles?

Cleveland steam jacketed kettles offer ultra efficient heat transfer, uniform heating and superior product handling. Steam jacketed kettles offer faster cooking times because two thirds of the cooking surface comes into contact with the product at a much lower temperature, compared to stock pots that use a much higher temperature only at the bottom of the pot. In addition, accurate temperature controls eliminate constant monitoring and resetting. Foods won’t burn or scorch and you can hold product at a simmer without over cooking. Tilting models makes product handling simple. Clean up is easy since food isn’t burned or over cooked like stock pots. Ideal For: Soups, delicate sauces, pasta, gravies, desserts,stews, braising meats, rice, reheating dishes and holding them until serving.

Increases Quality and Productivity

  • Heats from all sides and has 3-4 times larger heat surface than stock pots
  • Gentle uniform cooking.
  • Faster cooking times using high energy steam.
  • Precision temperature controls from a simmer to a boil.
  • No hot spots

Improves Operator's Profits By

  • Reduces food waste due to over cooking and burning.
  • Reheat meals without over cooking.
  • Simmer food all day without over cooking.
  • Simplifies and standardizes recipe and enhances recipe development.

Improves Worker Safety

  • Tilting models make pouring safe.
  • Eliminates heavy lifting and carrying hot stock pots.

Saves Energy and Time

  • Kettles use 35% less energy than stock pots on an open burner.
  • Keeps kitchens cooler.
  • Eliminates scrubbing of messy stock pots.
  • Butterfly shaped pouring lip accurately pours product into containers for serving.

Cleveland SD450K6 Standard Features

  • Type 304 Stainlesss Steel construction, with #4 finish on Kettle
  • Factory Assembled Kettle/Stand combinations with available kettle capacities to suit most needs
  • Steam Control Kit: includes: Needle Type Steam Control Valve, Steam Trap, Condensate Strainer, Check Valve, Nipples and Fittings, factory assembled and mounted on kettles(s)
  • Kettles are Mounted on Stainless Steel Stand of Modular Cabinetized Design
  • Table Top has Full Width Drain Trough equipped with standing 1.50" diameter male Drain Connection
  • Hot and Cold Water Faucet with Swing Spout
  • Sliding drain Catch Pan with Splash Shield, easy to position for use
  • Kettles are 2/3 Steam Jacketed and include Lift-Off Covers
  • 50 psi Steam Jacket Rating
  • 50 psi Chrome Plated Saftey Valve
  • Manual Tilting, Balanced Design
  • Typical approvals include NSF and ASME

Cleveland SD450K6 Optional Features

  • Type 316 Stainless Steel Kettle Interior for high acid food products (316)
  • Cooking Basket (BS)
  • Food Strainer (FS)
  • Steam Pressure Reducing Valve, where supply exceeds 45 psi (PRV)
  • Steam Supply Moisture Separator/Trap (MS)
  • Single Pantry Faucet (SPK)
  • Wall Meter, wall mount (GM For MLMF)
  • Water Cooling, wall mount
  • Back Wall or Back Splash (BW-32 or BS-4)
  • Self Locking Hand Tilt Mechanism (HTK - 12 gallons only)

Cleveland SD450K6 Specification

Shall be CLEVELAND, Kettle(s) with Stand, Model SD - _____ - K _____ , full width Drain Trough with1 1/2" male Drain Connection, Sliding Catch Pan and 2/3 Steam Jacketed Kettle(s) _____ ea. _____ Gallon (and _____ ea. _____ Gallon) Steam Jacket Ratings to be 50 psi; Kettle and Legs to be Type 304 Stainless Steel. To operate, connect directly to a steam source supplying from 5 to 45 psi steam. Steam Condensate Trap and Strainer, Factory Assembled and Installed; includes: Hot and Cold Water Faucet with Swing Spout and LiftOff Kettle Covers.

Write Your Own Review
You're reviewing:Cleveland SD450K6 Direct-Steam Kettle Cabinet Assembly
Your Rating