The Cleveland TKET3T Steam Jacketed Table Type Twin Electric Kettles
Why Use Cleveland Steam Jacketed Kettles?
Cleveland steam jacketed kettles offer ultra efficient heat transfer,
uniform heating and superior product handling. Steam jacketed kettles
offer faster cooking times because two thirds of the cooking surface comes
into contact with the product at a much lower temperature, compared to
stock pots that use a much higher temperature only at the bottom of the
pot. In addition, accurate temperature controls eliminate constant
monitoring and resetting. Foods won’t burn or scorch and you can hold
product at a simmer without over cooking. Tilting models makes product
handling simple. Clean up is easy since food isn’t burned or over cooked
like stock pots. Ideal For: Soups, delicate sauces, pasta, gravies,
desserts,stews, braising meats, rice, reheating dishes and holding them
Increases Quality and Productivity
Heats from all sides and has 3-4 times larger heat surface than stock
Gentle uniform cooking.
Faster cooking times using high energy steam.
Precision temperature controls from a simmer to a boil.
No hot spots
Eliminates pot watching, constant stirring and large stock pots.
Improves Operator's Profits By
Reduces food waste due to over cooking and burning.
Reheat meals without over cooking.
Simmer food all day without over cooking.
Simplifies and standardizes recipe and enhances recipe development.
Improves Worker Safety
Tilting models make pouring safe.
Eliminates heavy lifting and carrying hot stock pots.
Saves Energy and Time
Kettles use 35% less energy than stock pots on an open burner.
Keeps kitchens cooler.
Eliminates scrubbing of messy stock pots.
Butterfly shaped pouring lip accurately pours product into containers
Cleveland TKET3T Standard Features
Manual tilting, balanced design
Space saving design through shared, center console
Balanced, attractive appearance
Self-contained, easily installed - needs only an electrical hook-up
Steam jacket filled with treated water, venting and/or refilling is not
Accurate, consistant solid state temperature controls (mechanical
thermostat not as accurate) - less than ±1°C variance (ideal for
simmering). Operating temperature range from 145° - 260°F (63°C - 127°C)
Control panel includes:
LED indicator for heat cycle
LED indicator for low water
Power ON/OFF switch
Adjustable temperature control dial
Easily cleaned: kettle and all exterior surfaces are of type 304
stainless steel with an #4 finish
Rear mounted easy access pressure gauge and pressure relief valve to
prevent tampering.Color coded easy to read pressure gauge with "green"
and "vent air zone"
Water resistant controls, splash-proof construction
Large pouring lip for high capacity and chunky products
Re-inforced rolled rim design prevents damage to kettle rim, eliminates
"bar rim designs"
50 psi steam jacket rating for higher cooking temperatures
50 psi safety valve
Solid state water level control (no sight glass gauge to break or leak)
Splash proof element cover with a double gasket seal
Self locking marine type tilting mechanism prevents accidental
spills. Balanced design makes it easy to tilt
Standard for TKET-6-T and TKET-12-T is 208-240 volts, 60 Hz, 3-
phase, 3-wire. Models TKET-6-T and TKET-12-T are field rewirable to
single phase. (Model TKET-3-T available in single phase, 2-wire only).
Typical approvals include UL., CSA, CE, NSF and ASME
Cleveland TKET3T Optional Features
Lift-off Cover (CL)
Common Hot and Cold (DPK) or Cold only (SPK) Water Faucet
with Swing Spout. Requires Mounting Bracket (FBKT)
316 Stainless Steel Kettle Liner for high acid products (316-G)
Food Strainer (FS)
Cooking Baskets (BS)
High wattages (HW) and special voltages (see back page)
Measuring Strip (MS)
Kettle Markings (KM)
Protective Control Panel (PCE)
Stainless Steel Equipment Stand with Drain Drawer and Splash
Shield (ST-42 for TKET-3-T & TKET-6-T), (ST-55-t for TKET-12-T)
Cleveland TKET3T Specification
CLEVELAND, Twin Style Electric kettle, Table Type, self-contained, tilting. 2/3 steam jacketed, type 304 Stainless Steel kettle and supports. Jacket rated at 50 psi with Safety Valve, Permanently filled Steam Jacket, Splash Proof Solid State Temperature (±1° C) and Safety Control System in plug-in Module including L.E.D. indicators. Marine Lock. Optional Lift Off Cover.