CONSTRUCTION: Easy cleaning, corrosion resistant stainless steel
finish, welded with angleiron and aluminized inner framing.Sturdy 5˝
heavydutystainlesspipelegswithadjustablefeet.Stainlesssteelbullnoserail is functional on which to set plates or utensils and also serves as
control protection. Double wall construction with heavy insulation for
cooler operation. Installation clearances for non-combustiblesurfaces
are 0˝ on the sides and 4˝ in the rear. Char-broilers are approved for
use in non-combustible locations only.
CONTROLS: Equipped with brass gas valves and automatic standing
pilots. Pressure regulators are set at the factory for the gas specified.
Optimal pressures are 4˝ WC for natural gas and 10˝ WC for propane.
Manifold sizeis ¾˝ NPT. Allcontrolsaretested and confirmed in good
working order. Calibration and adjustmentsaretheresponsibility of the
installer.
BURNERS: 12˝ incrementalgriddle & char-broilermodelsfeaturecast
iron “H” pattern burners, one for each 12˝ increment; griddles are
rated at 25,000 BTU ea. & char-broilersat 30,000 ea. Optional 35,000
BTU “H” char-broiler burners available. 18˝ and 30˝ griddle & charbroiler sections feature 2 and 4 straight burners respectively; griddles
arerated at 18,000 BTU ea. & char-broilersat 20,000 ea. Open burners
arecast iron withoutgaskets, rated at 24,000 BTU’sand featurealarge
7˝ “star” flame pattern.
CHAR-GRATES: Cast iron top grate sections measure 23.75˝deep,
designed with cast-in grease trough on each blade to allow grease run
off into the front cold zone grease trough and reduces flare up. Each
section is reversible for sloped or level grilling. Stainless steel splash
guards on 3 sides graduating up to 4˝ high. Grease drain slot is 3.5˝ x
1˝ and feeds into a large, removablegrease drawer
RADIANTS: Char-broiler radiants are either lava rock or heavy duty
angleiron, inverted “V”typeforsuperior uniformheatingtemperature.
“V”typeradiantsare easily removable for cleaning.
OPEN TOP GRATES: Open burner grates are 12˝ x 12˝ solid cast
iron with spillover bowl that also reflects heat to the cooking surface
for added efficiency and designed for easy movement of pots across
top sections.
GRIDDLE PLATE: Highly polished to minimize food sticking. 1˝ thick
plate is standard. 4˝ high splash guard is standard. 24˝ deep cooking
surface with front cold zone grease trough. Grease drain slot is 3.5˝ x 1˝
and feeds into a seamless, deep, removable grease drawer.