Continental Refrigerator D2RSNSGD 52" Two Section Reach-In Refrigerator w/ 2 Glass Sliding Doors, 32 cu. ft.
CON-D2RSNSGD
Certifications
| Brand | Continental Refrigerator |
|---|---|
| Model Number | D2RSNSGD |
| Weight | 545 lbs |
| Width | 52" |
| Depth | 29.5" |
| Height | 82.25" |
| Door Type | glass |
| Refrigerator Type | Reach-In |
| Size | 2 section |
| Door Quantity | 2 |
| Exterior Finish | stainless steel front, aluminum exterior |
| Compressor HP | 1/3 HP |
| Compressor Location | top mounted |
| Interior Finish | all aluminum interior |
| Supports | legs |
| Refrigerant Type | R290 |
| Capacity (Cu. Ft.) | 32 |
| Hinge Location | without hinge |
| Door Style | sliding / full |
| Certifications | cETLus, NSF |
Continental Refrigerator has one of the most diversified commercial Reach-In product lines in the industry with standard features not found on other units. Continental Refrigerator's Designer Line models are equipped with both top and side air distribution ducts which allow for constant, uniform temperature throughout the cabinet.
The refrigeration/heating systems on Continental Refrigerator's Designer Line ReachIns & Pass-Thrus are accessible on top of the cabinet and separate from the food zone, increasing food storage capacity.
Performance-run tested for a minimum of 12 hours providing a highly sophisticated temperature analysis recording, exclusive to each cabinet.
All models are equipped with both top and side air distribution ducts to keep product load at a uniformly constant temperature.
Designer Line Refrigerators and Freezers utilize a “Plug” refrigeration system where the assembly is outside the food storage zone. The “Plug” system can be removed for servicing, cleaning or converting from a refrigerator to freezer in the field. Condensate water goes into a drain pan constructed with corrosion resistant 300 Series stainless steel. The condensate water is then evaporated by a non-electric, corrosion resistant 300 Series stainless steel hot gas discharge condensate loop.
The image above may not exactly represent the product
