Crown Direct Steam
with Cabinet Base
Shall be a Crown Models,
pressure and pressure-less compartment cooker operating on
direct steam. The cooker shall be constructed of all welded type
304 #4 finished stainless steel. The doors shall have a removable
inner liner of aluminum plate with full perimeter gasket seal, an
outer liner of one piece welded stainless steel, and a wheel and
screw closing mechanism. The doors with a clear opening of
10-1/4” x 26-3/8” (260 mm x 670 mm) shall latch upon closing
and open 15° upon latch release. Compartment operation shall
be a maximum pressure of 6 psi (41 kPa).
The control housing shall be constructed of #4 finish stainless
steel with a full-access removable panel. The timing of each
compartment shall be independently controlled by an automatic
timer control with visible and audible signal. At the end of the
cooking cycle, the controls automatically shut off and exhaust the
incoming steam, drain the condensate from the compartment,
and sounds a continuous signal until turned off manually.
The top compartment shall be either a pressure-less free venting
cooker or a pressure cooker operating at a maximum of 6 psi (41
kPa) as selected by the operator. Top compartment is supplied
with a mode selector switch. Each cooking compartment shall
be standard with universal pan supports.
The compartment cooker shall be mounted on a cabinet base
with full perimeter angle frame, reinforced counter, hinged doors
and 6” (152 mm) stainless steel legs fitted with 4 adjustable
flanged feet for securing to the floor. Exterior shall be stainless
steel #4 finish with removable side panels.