Crown DLTM-80-2 Direct Twin Unit Kettle Mixer

Crown DLTM-80-2 Direct Twin Unit Kettle Mixer


Crown DLTM-80-2 Direct Twin Unit Kettle Mixer

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

This item is too large for a liftgate. It can be delivered with a loading dock or forklift.

Tilting Kettle/Mixer, direct steam, (2) 80 gallon capacity kettles, 2/3 jacket, power tilt, 316 stainless steel liner, floor mounted control console supports, includes (2) agitators, 304 stainless steel construction, stainless steel tubular legs with adjustable flanged feet, (2) variable speed motors, 5 HP, cCSAus


Product PDF

Crown DLTM-80-2 Specs

Brand Crown
Model Number DLTM-80-2
Weight 1490 lbs
Width 116"
Depth 60"
Height 80"
Jacket 2/3 jacket
Type tilt
Base open leg
Kettle Liner 316 stainless steel

Crown Direct Steam Leg-Mounted Tilting Mixer Kettle


  • Shall be a Crown models, direct steam, twin tilting kettle operating at a maximum of 30 psi. Construction shall be welded stainless steel type 304 satin finish. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle with 316 stainless steel liner for high acid content products. The bottom of the kettle shall be of hemispheric design for maximum heat transfer. The tubular legs shall be constructed of stainless steel pipe fitted with four hole, adjustable, flanged feet for securing to the floor. A sealed stainless steel tilt mechanism shall permit the kettle to tilt forward a full 90° for complete emptying. The tilt mechanism shall be self locking for positive stop action.


  • The mixer is a variable speed unit powered by a 5 hp electric motor driving a hydraulic pump. Two agitators shall be included, a primary stainless steel scraper/agitator, and a secondary high speed mixer. Both agitators shall be removable for cleaning and no tools will be required for removal.
  • The console front to have the main power switch, mixer lift switch and variable speed control.
  • The bridge is constructed of 10 gauge stainless steel and contains two heavy duty hydraulic motors to drive the agitators. The bridge shall be power tilt, and swing 140° out of the way for kettle tilting or cleaning.
Write Your Own Review
You're reviewing:Crown DLTM-80-2 Direct Twin Unit Kettle Mixer
Your Rating