Crown DMT-6 Direct-Steam Kettle Cabinet Assembly

Crown DMT-6 Direct-Steam Kettle Cabinet Assembly


Crown DMT-6 Direct-Steam Kettle Cabinet Assembly

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

Kettle/Cabinet Assembly, direct steam, (1) 6 gallon tilting kettle, reversible tilt handle, 24" cabinet base, 316 stainless steel liner, deck mount hot & cold fill faucet, 3" deep stainless steel sink with splash guard, stainless steel construction, 6" stainless steel legs with adjustable flanged feet


Product PDF

Crown DMT-6 Specs

Brand Crown
Model Number DMT-6
Weight 225 lbs
Width 24"
Depth 33"
Height 62.13"
Base 24" wide cabinet
Kettle Liner stainless steel

Crown Direct Steam 2/3 Jacketed Kettle Stationary or Tilting


  • Shall be a Crown Models, steam jacketed kettle models DMT, tilting type, or DMS,stationary type. Kettle shall be mounted in enclosed cabinet base and interior liner shall be 316 stainless steel for high acid content products. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispherical design for superior heat circulation.
  • A steam control valve and hot and cold water, deck mount fill faucet shall be mounted on the stainless steel counter top. Kettle shall be equipped with 2” (50 mm) sanitary draw off with perforated strainer is enclosed in the cabinet for sanitary purposes. Steam trap and a safety relief valve are standard. Swing drain for draw-off valve shall be removable without tools and shall be equipped with removable strainer. DMS & DMT models shall include a one piece stainless steel spring assist cover.
  • Cabinet base shall be of modular design to match other Crown cooking equipment as required and shall be equipped with 6” (152 mm) stainless steel legs with 4 adjustable flanged feet for securing to the floor. All stainless steel exterior, # 4 finish, with removable side panels and doors with magnetic latches.
  • DMT models shall be equiped with a 1/2 H.P. hydraulic system for tilting which allows complete emptying of contents. Tilting may be stopped at any time without kettle tilting back. A standard pan support shall hold one 12” x 20” x 2-1/2” pan (305 mm x 508 mm x 64 mm), keeping the pan in a horizontal position throughout the tilting operation and shall be removable without tools.
  • The unit shall be ASME Code stamped and National Board Registered and NSF Certified. DMT models shall also be c-CSA-us certified.


  • Stainless steel cabinet
  • 4 Adjustable flanged feet
  • One piece spring assist cover
  • 2" (51 mm) tangent draw off valve c/w TPS-2 strainer
  • Steam control valve and steam trap
  • Swing drain
  • Hot and cold deck mount faucet (DMF)
  • Hydraulic tilt (DMT models)
  • Pan carrier (DMT models)
Write Your Own Review
You're reviewing:Crown DMT-6 Direct-Steam Kettle Cabinet Assembly
Your Rating