Shall be a Crown Models, selfgenerating, electric, tilting kettle. A double wall kettle interior shall
form a steam jacket around the lower 2/3 of the kettle. The jacket
enclosure shall contain distilled water which is factory sealed.
The bottom of the kettle shall be of hemispherical design for
superior heat circulation.
The mounting base shall include the kettle mounting lugs
concealed inside a rectangular enclosure and a stainless steel
A removable operating handle with heat proof knob shall be
mounted on the right.
Construction shall be of all welded satin finish stainless steel,
type 304. The interior cooking surface shall be of type 316
stainless steel for added resistance to corrosion. The kettle shall
be ASME constructed, National Board Registered, c-CSA-us
and NSF certified.
The controls shall be water resistant, integrally mounted and
shall include a power switch, solid state thermostat, pilot light,
vacuum/pressure gauge, safety valve, low water light, and low
water shut off.
The kettle shall operate in a temperature range of 165°F to
285°F (74°C to 140°C) at a maximum pressure of 50 psi (345
kPa). The kettle shall come standard with removable elements.
Low water level cut-off and indicator
Safety relief valve
Type 316 stainless steel liner
2/3 steam jacket
50 PSI (345 kPa) high pressure operation for higher cooking temperature
Integrally mounted controls
“Clean lock” to hold kettle in cooking position or 105° for ease of cleaning