Crown Electric Counter
Tilting Kettle with Crank Tilt
SPECIFICATIONS:
Shall be a Crown Models, selfgenerating, electric, counter, crank tilting kettle. A double wall
kettle interior shall form a steam jacket around the lower 2/3
or the kettle. The jacket enclosure shall contain distilled water
which is factory sealed. The bottom of the kettle shall be of
hemispherical design for superior heat circulation.
A stainless steel housing shall enclose the controls and tilt
mechanism. A stainless steel rectangular mounting base shall
include the kettle mounting lugs concealed inside the enclosure.
The tilt mechanism shall be a permanently lubricated, self
contained gearbox for smooth action, easy one hand tilting, and
shall be self locking for positive stop action.
Construction shall be of all welded #4 finish stainless steel, type
304. The interior cooking surface shall be of type 316 stainless
steel for added resistance to corrosion. The kettle shall be
ASME Code stamped, National Board Registered, c-CSA-us
and NSF certified.
The controls shall be water resistant, integrally mounted, and
shall include a power switch, solid state thermostat, pilot light,
vacuum/pressure gauge, safety valve and low water shut off
with low water light.
The kettle shall operate in a temperature range of 165°F to 285°F
(74°C to 140°C) at a maximum pressure of 50 psi (345 kPa).
The kettle shall be standard with removable elements.
FEATURES:
Low water level cut-off and indicator.
Pressure gauge.
Solid state temperature control.
Safety relief valve.
Type 316 stainless steel liner.
2/3 steam jacket.
50 PSI (345 kPa) high pressure operation for higher cooking temperature.
Integrally mounted controls.
Removable elements.
Hand crank, smooth action tilt mechanism which is self locking for positive stop action and tilts past 90 degrees for ease of cleaning.