Shall be a Crown Models,
self-generating, electric, tri-leg kettle, ASME Code stamped, National
Board Registered, c-CSA-us and NSF certified. A double wall kettle
interior shall form a steam jacket around the lower 2/3 of the kettle. The
jacket enclosure shall contain distilled water which is factory sealed. The
bottom of the kettle shall be of hemispherical design for superior heat
circulation. Kettle will be mounted on 3 stainless steel tubular legs fitted
with a 4-hole adjustable foot for securing unit to the floor.
Construction shall be all welded #4 finish stainless steel, type 304. The
interior liner shall be standard 316 for high acid content cooking. The
controls shall be integrally mounted and shall include a power switch,
thermostat, pilot light, low water light, vacuum/pressure gauge, safety
relief valve and low water shut off. Faucet bracket standard.
The kettle shall operate in a temperature range of 165°F to 285°F
(74°C to 140°C) at a maximum pressure of 50 psi (345 kPa). Includes
faucet bracket.