Crown EL-80 Stationary Electric Kettle

Crown EL-80 Stationary Electric Kettle


Crown EL-80 Stationary Electric Kettle

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

Stationary Kettle, electric, 80 gallon capacity, 2/3 jacket, thermostatic control, 2" draw-off, includes: perforated strainer, spring assisted hinged cover & faucet bracket, 316 stainless steel interior liner, 304 stainless steel exterior finish, tri-leg, cCSAus


Product PDF

Crown EL-80 Specs

Brand Crown
Model Number EL-80
Weight 445 lbs
Width 36.75"
Depth 40"
Height 81"
Base tri-leg
Kettle Liner 316 stainless steel
Kettle Jacket partial jacket

Crown Electric Steam Tri-Leg Kettle


  • Shall be a Crown Models, self-generating, electric, tri-leg kettle, ASME Code stamped, National Board Registered, c-CSA-us and NSF certified. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circulation. Kettle will be mounted on 3 stainless steel tubular legs fitted with a 4-hole adjustable foot for securing unit to the floor.
  • Construction shall be all welded #4 finish stainless steel, type 304. The interior liner shall be standard 316 for high acid content cooking. The controls shall be integrally mounted and shall include a power switch, thermostat, pilot light, low water light, vacuum/pressure gauge, safety relief valve and low water shut off. Faucet bracket standard.
  • The kettle shall operate in a temperature range of 165°F to 285°F (74°C to 140°C) at a maximum pressure of 50 psi (345 kPa). Includes faucet bracket.
Write Your Own Review
You're reviewing:Crown EL-80 Stationary Electric Kettle
Your Rating