Shall be a Crown Models , selfgenerating, electric tilting kettle. A double wall kettle interior shall
form a steam jacket around the lower 2/3 of the kettle. The jacket
enclosure shall contain distilled water which is factory sealed.
The bottom of the kettle shall be of hemispherical design for
superior heat circulation.
The console shall be drip proof, stainless steel clad and shall
be supported on all welded, 1-5/8” (41 mm) diameter stainless
steel pipe frame and legs fitted with 4 hole adjustable flanged
feet for securing to floor.
The kettle shall pivot on a trunnion connected to the tilt
mechanism and the out-bore bearing connected to the frame
and shall permit the kettle to tilt forward a full 90° for complete
emptying. The tilt mechanism shall be self locking for positive
stop action.
Construction shall be all welded #4 finish stainless steel, type
304. The interior liner shall be standard stainless steel type 316
for high acid content cooking. The controls shall be integrally
mounted and shall include a power switch, thermostat, pilot light,
low water light, vacuum/pressure gauge, safety relief valve, and
low water shut off. Faucet bracket standard.
The kettle shall be standard with removable elements. The kettle
shall operate in a temperature range of 165°F to 285°F (74°C to
140°C) at a maximum pressure of 50 psi (345kPa).
The image above may not exactly represent the product
