Shall be a Crown models , selfgenerating, electric kettle. Construction shall be welded stainless
steel type 304 satin finish. A double wall kettle interior shall form
a steam jacket around the lower 2/3 of the kettle, 316 stainless
steel liner for high acid content products. The bottom of the kettle
shall be of hemispheric design for maximum heat transfer. The
tubular legs shall be constructed of stainless steel pipe fitted
with four hole adjustable flanged feet for securing to the floor. A
sealed stainless steel tilt mechanism shall permit the kettle to
tilt forward a full 90° for complete emptying. The tilt mechanism
shall be self locking for positive stop action.
FEATURES:
The mixer is a variable speed unit powered by a 5 hp electric
motor driving a hydraulic pump. Two agitators shall be included,
a primary stainless steel scraper/agitator, and a secondary high
speed mixer. Both agitators shall be removable for cleaning and
no tools will be required for removal.
The console front to have the main power switch, mixer lift switch
and variable speed control.
The bridge is constructed of 10 gauge stainless steel and
contains two heavy duty hydraulic motors to drive the agitators.
The bridge shall be power tilt, and swing 140° out of the way for
kettle tilting or cleaning.
Kettle controls shall include a power switch, indicator light,
vacuum/pressure gauge, pressure relief valve and low water
shut off. Thermostat range to be 140°F to 285°F (60°C to 140°C),
a maximum pressure of 50 psi (345 kPa). Electric elements to
be removable.