Shall be a Crown models , selfgenerating, electric, pedestal kettle, ASME Code stamped, National
Board Registered, c-CSA-us and NSF certified. A double wall kettle
interior shall form a steam jacket around the lower 2/3 of the kettle. The
jacket enclosure shall contain distilled water which is factory sealed.
The bottom of the kettle shall be of hemispherical design for superior
heat circulation.
Pedestal base shall have four 7/16 of an inch holes evenly spaced for
securing unit to floor.
Construction shall be all welded #4 finish stainless steel, type 304. The
interior liner shall be standard 316 for high acid content cooking. The
controls shall be integrally mounted and shall include a power switch,
thermostat, pilot light, low water light, vacuum/pressure gauge, safety
relief valve and low water shut off. Faucet bracket standard.
The kettle shall be standard with removable elements. Convenience
features shall include a 2” (50 mm) sanitary draw-off valve with perforated
strainer and spring assist hinged stainless steel domed cover.
The kettle shall operate in a temperature range of 165°F to 285°F
(74°C to 140°C) at a maximum pressure of 50 psi (345 kPa). Includes
faucet bracket.