Shall be a Crown models , selfgenerating, electric, pedestal kettle, ASME Code stamped, National
Board Registered, c-CSA-us and NSF certified. A double wall kettle
interior shall form a steam jacket around the lower 2/3 of the kettle. The
jacket enclosure shall contain distilled water which is factory sealed.
The bottom of the kettle shall be of hemispherical design for superior
Pedestal base shall have four 7/16 of an inch holes evenly spaced for
securing unit to floor.
Construction shall be all welded #4 finish stainless steel, type 304. The
interior liner shall be standard 316 for high acid content cooking. The
controls shall be integrally mounted and shall include a power switch,
thermostat, pilot light, low water light, vacuum/pressure gauge, safety
relief valve and low water shut off. Faucet bracket standard.
The kettle shall be standard with removable elements. Convenience
features shall include a 2” (50 mm) sanitary draw-off valve with perforated
strainer and spring assist hinged stainless steel domed cover.
The kettle shall operate in a temperature range of 165°F to 285°F
(74°C to 140°C) at a maximum pressure of 50 psi (345 kPa). Includes