Crown EP-80 Stationary Electric Kettle

Crown EP-80 Stationary Electric Kettle


Crown EP-80 Stationary Electric Kettle

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

Stationary Kettle, electric, 80 gallon capacity, 2/3 jacket, thermostatic control, 2" draw-off, includes: perforated strainer, spring assisted hinged cover & faucet bracket, 316 stainless steel interior liner, 304 stainless steel construction, pedestal base, cCSAus


Product PDF

Crown EP-80 Specs

Brand Crown
Model Number EP-80
Weight 445 lbs
Width 36.75"
Depth 39"
Height 45"
Base pedestal base
Kettle Liner 316 stainless steel
Kettle Jacket partial jacket

Crown Electric Pedestal Kettle


  • Shall be a Crown models , selfgenerating, electric, pedestal kettle, ASME Code stamped, National Board Registered, c-CSA-us and NSF certified. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circulation.
  • Pedestal base shall have four 7/16 of an inch holes evenly spaced for securing unit to floor.
  • Construction shall be all welded #4 finish stainless steel, type 304. The interior liner shall be standard 316 for high acid content cooking. The controls shall be integrally mounted and shall include a power switch, thermostat, pilot light, low water light, vacuum/pressure gauge, safety relief valve and low water shut off. Faucet bracket standard.
  • The kettle shall be standard with removable elements. Convenience features shall include a 2” (50 mm) sanitary draw-off valve with perforated strainer and spring assist hinged stainless steel domed cover.
  • The kettle shall operate in a temperature range of 165°F to 285°F (74°C to 140°C) at a maximum pressure of 50 psi (345 kPa). Includes faucet bracket.
Write Your Own Review
You're reviewing:Crown EP-80 Stationary Electric Kettle
Your Rating