Crown GCX-10-6-6 Gas Steamer Kettle Combination

Crown GCX-10-6-6 Gas Steamer Kettle Combination

CWN-GCX-10-6-6
Details

Crown GCX-10-6-6 Gas Steamer Kettle Combination

SKU CWN-GCX-10-6-6
Disclosure The image above may not exactly represent the product

$66,613.00

Call or Chat Call or Chat


Convection Steamer/Kettle, gas, (2) compartment, (2) 6 gallon kettles, (5) 12" x 20" pan capacity per compartment, 60" cabinet base, removable stainless steel pan supports, electronic ignition, automatic blowdown, 60 minute timer per compartment, deck mount faucet valve, swing nozzle & integral sink, CSD-1 code package, includes water filter system, split water line, automatic water level control, pressure gauge, water gauge glass, operating pressure control, safety high-limit pressure control, safety relief valve & cathodic protector, 316 stainless steel liner, 304 stainless steel construction, 6" legs, adjustable flanged feet, CSA Flame, CSA Star

Resources

Product PDF

Crown GCX-10-6-6 Specs

Brand Crown
Model Number GCX-10-6-6
Weight 1050 lbs
Width 60"
Depth 33"
Height 66.13"
Width (side to side) 60"
Pan capacity per compartment (5) 12"x20"x2-1/2" deep
Compartments 2

Crown Gas Compartment Steamer With 2 Kettles and Gas Fired Steam Boiler

SPECIFICATIONS:

  • Shall be a Crown models, convection steamer complete with (2) 6 gallon kettles or (1) 6 and (1)10 gallon kettle on a modular gas fired steam boiler base, with stainless steel type 304 exterior and #4 finish, deck mounted faucet valve, swing nozzle and integral sink with common drain.
  • The convection steamer shall have doors with a removable inner liner of stainless steel, full perimeter gasket seal, outer shell of one piece, all welded, stainless steel, positive lock and seal mechanism and a stainless steel drip trough connected to the drain in order to collect condensate when doors are opened. Each cooking chamber shall be constructed of all welded type 316 stainless steel, fully insulated and provided with removable stainless steel pan supports and shall be: GCX-2: 13.875”W x 10.875”H x 19.875”D (352 mm x 276 mm x 504 mm). GCX-10: 13.875”W x 17.375”H x 19.875”D (352 mm x 441 mm x 504 mm).
  • Steamer controls shall be accessible through a fully removable side panel and each compartment shall include a 60 minute mechanical timer with ready and cooking pilot light and shall interrupt steam flow to the chamber when the compartment door is opened during cooking cycle and shall be reactivated when the door is closed. An audible signal will sound at the end of the cooking cycle.
  • The cabinet base with gas boiler and controls shall be provided with full perimeter painted angle frame, reinforced kettle and boiler mountings, hinged doors with magnetic latch and 6” (152 mm) stainless steel legs fitted with 4 adjustable flanged feet for securing unit to the floor. Boiler controls shall include automatic water level control, pressure gauge, water gauge glass, operating pressure control, safety high-limit pressure control, safety relief valve and cathodic protector. The boiler shall be ASME code stamped and National Board registered. Unit comes standard with a water treatment system, split water line, nickel plating, CSD-1 boiler controls, electronic ignition and automatic blowdown.

FEATURES:

  • Water Treatment System
  • Split water line
  • CSD-1 boiler controls
  • Electronic ignition
  • Automatic blowdown
Write Your Own Review
You're reviewing:Crown GCX-10-6-6 Gas Steamer Kettle Combination
Your Rating