Crown GCX-2-36 Floor Model Gas Convection Steamer

Crown GCX-2-36 Floor Model Gas Convection Steamer

CWN-GCX-2-36
Details

Crown GCX-2-36 Floor Model Gas Convection Steamer

SKU CWN-GCX-2-36
Disclosure The image above may not exactly represent the product

$31,250.00

Net 30 or as low as 762.91/mo with Credit Key Apply Now


Contact us Contact us for best pricing!


Resources

Product PDF

Crown GCX-2-36 Specs

Brand Crown
Model Number GCX-2-36
Weight 764 lbs
Width 36"
Depth 33"
Height 55.5"
Width (side to side) 36"
Pan capacity per compartment (3) 12"x20"x2-1/2" deep
Interior Finish 316 stainless steel
Type 1 steam generator

Crown Gas Convection Steamer on Cabinet Base

SPECIFICATIONS:

  • Shall be a Crown models, convection steamer on a modular, gas fired, steam boiler base, with stainless steel type 304 exterior and #4 finish. The steamer shall have doors with removable inner liner of stainless steel, fullperimeter gasket seal, outer shell of one piece all welded stainless steel, positive lock and seal mechanism and a stainless steel drip trough connected to a drain to collect condensated when doors are opened. Each cooking chamber shall be constructed of all welded type 316 stainless steel, fully insulated and provided with removable stainless steel pan supports and shall be: GCX-2, 13.875” W x 10.875” H x 19.875” D (352 mm x 276 mm x 504 mm). GCX-10, 13.875” W x 17.375” H x 19.875” D (352 mm x 441 mm x 504 mm).
  • Control housing shall be accessible through a fully removable side panel and each compartment shall include a 60 minute mechanical timer with ready pilot and cooking pilot light and an audible signal which will sound at the end of the cooking cycle. Steam flow to the chamber shall be interrupted when the compartment door is opened during cooking cycle and shall be reactivated when the door is closed.
  • The convection steamer shall be mounted on a cabinet base with full perimeter angle frame, reinforced counter and boiler mountings, gas boiler with controls, all stainless steel exterior, hinged door(s) with magnetic latch and 6” (152 mm) stainless steel legs fitted with 4 adjustable flanged feet for securing unit to the floor. Standard boiler controls shall include automatic water level control, pressure gauge, water gauge glass, operating pressure control, safety hight-limit pressure control, safety relief valve and cathodic protector. Unit comes standard with a split water line, CSD-1 boiler controls, electronic ignition, nickel plating, automatic blowdown, and water treatment system.
  • The unit shall be ASME code stamped and National Board registered, AGA, CGA and NSF certified.

FEATURES:

  • Water Treatment System
  • CSD-1 boiler controls
  • Electronic ignition
  • Automatic blowdown
  • Split water line
Write Your Own Review
You're reviewing:Crown GCX-2-36 Floor Model Gas Convection Steamer
Your Rating