Shall be a Crown models pressure and pressureless
compartment cooker with gas steam boiler. The cooker shall be
constructed of all-welded satin finish stainless steel, type 304. The
doors shall have a removable inner liner of aluminum plate with full
perimeter gasket seal, an outer liner of one-piece all-welded stainless
steel, and a wheel-and-screw closing mechanism. The doors, with a
clear opening of 10-1/4” x 26-3/8”, shall latch upon closing and shall
open 15° upon latch release.
The lower compartment shall be a pressure cooker only and shall operate
at a maximum pressure of 6 psi (41 kPa). The upper compartment
shall be either a pressureless free venting cooker or a pressure cooker
operating at a maximum of 6 psi (41 kPa), as selected by the operator.
The control housing shall be constructed of stainless steel with a full
access removable panel. Each compartment shall have independent
automatic timer controls with visual and audible signals. In the lower
compartment and the pressure mode of the upper compartment, the
controls automatically shut off and exhaust the incoming steam, drain the
condensate from the compartment and sound a continuous signal until
turned off manually. In the pressureless mode of the upper compartment,
the controls shall also include a mode selector switch and a steam flow
cut-off when the door is opened.
The compartment cooker shall be mounted on a cabinet base with
full perimeter angle frame, reinforced counter and boiler mountings,
gas boiler with controls, all stainless steel exterior, hinged doors and
6” (152 mm) stainless steel legs with 4 adjustable flanged feet for
mounting to the floor. Water treatment system, automatic blow down,
CSD-1 boiler controls, split water line, nickel plating, and electronic
ignition come standard.
Water Treatment System
Universal pan supports for each cooking compartment