Crown GL-100E Stationary Gas Kettle

Crown GL-100E Stationary Gas Kettle


Crown GL-100E Stationary Gas Kettle

Disclosure The image above may not exactly represent the product


Net 30 or as low as 744.60/mo with Credit Key Apply Now

Call or Chat Call or Chat


Product PDF

Crown GL-100E Specs

Brand Crown
Model Number GL-100E
Weight 1100 lbs
Width 41.63"
Depth 60.13"
Height 49.25"
Capacity 100 gal
Base tri-leg
Kettle Liner 316 stainless steel
Kettle Jacket partial jacket

Crown Gas Steam Kettle Stationary


  • Shall be a Crown models, gas fired, self-contained, fully insulated steam jacketed kettle, ASME Code stamped, National Board Registered, AGA and CGA design certified, NSF approved. The unit comes standard with a spring assisted cover. The kettle shall be constructed with an exterior of type 304 stainless steel, #4 sanitary finish and four 6” stainless steel adjustable legs. The interior kettle liner shall be a one piece welded construction made with type 316 stainless steel with #4 sanitary finish, 2/3 jacketed and shall be furnished with a 2” tangent draw off valve with strainer as standard. The recessed control panel is located on the front side of the unit in full view of the operator and is easy to use. Standard controls include electronic ignition, direct immersion thermostat, water sight glass, cooking light, pressure gauge and low water indicator light. Safety features shall include a low water cut off, pressure relief valve, pressure switch and a safety gas shutoff valve.
  • A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispherical design for superior heat circulation.
  • Convenience features shall include 2” (50 mm) sanitary drawoff valve with a heat resistant handle. Faucet bracket included.
Write Your Own Review
You're reviewing:Crown GL-100E Stationary Gas Kettle
Your Rating