Shall be a Crown models,
gas fired, self-contained, fully insulated steam jacketed kettle,
ASME Code stamped, National Board Registered, AGA and CGA
design certified, NSF approved. The unit comes standard with
a spring assisted cover. The kettle shall be constructed with an
exterior of type 304 stainless steel, #4 sanitary finish and four 6”
stainless steel adjustable legs. The interior kettle liner shall be
a one piece welded construction made with type 316 stainless
steel with #4 sanitary finish, 2/3 jacketed and shall be furnished
with a 2” tangent draw off valve with strainer as standard. The
recessed control panel is located on the front side of the unit in
full view of the operator and is easy to use. Standard controls
include electronic ignition, direct immersion thermostat, water
sight glass, cooking light, pressure gauge and low water indicator
light. Safety features shall include a low water cut off, pressure
relief valve, pressure switch and a safety gas shutoff valve.
A double wall kettle interior shall form a steam jacket around
the lower 2/3 of the kettle. The bottom of the kettle shall be of
hemispherical design for superior heat circulation.
Convenience features shall include 2” (50 mm) sanitary drawoff valve with a heat resistant handle. Faucet bracket included.