Shall be a Crown Models,
self-contained, gas fired, steam jacketed kettle, ASME Code
stamped, National Board Registered, AGA, CGA and NSF
certified for operation up to 50 PSI. A double wall interior shall
form a steam jacket around the lower 2/3 of the kettle. The jacket
enclosure shall contain factory sealed, distilled water. The kettle
interior shall be stainless steel, type 316 for high acid content
cooking. Kettle exterior is fully insulated. The bottom of the kettle
shall be of hemispherical design for superior heat circulation.
The recessed control panel is located on the front right of the
unit, in full view of the operator and easy to use. Standard
controls include direct immersion thermostat for operation at a
temperature range of 165°F to 275°F (74°C to 135°C) at 50 psi,
water sight glass, cooking light, pressure gauge and electronic
ignition with ignition indicator light. Comes standard with 3 piece
split faucet bracket. Safety features include low water shut off
with indicator light, pressure switch, pressure relief valve and a
100% safety gas shut off valve.
The kettle shall pivot on trunnions connected to the tilt
mechanism and control consoles. The tilt mechanism shall allow
the kettle to tilt past 90° for complete emptying. The console
shall be drip proof, stainless steel clad and shall be supported
on all welded, 1-5/8” (41 mm) diameter stainless steel legs with
flanged feet for securing to the floor.
The image above may not exactly represent the product
