Crown GMT-10-6 Gas Kettle Cabinet Assembly

Crown GMT-10-6 Gas Kettle Cabinet Assembly

CWN-GMT-10-6
Details

Crown GMT-10-6 Gas Kettle Cabinet Assembly

SKU CWN-GMT-10-6
Disclosure The image above may not exactly represent the product

$38,286.00

Call or Chat Call or Chat


Kettle/Cabinet Assembly, gas, (1) 6 gallon & (1) 10 gallon tilting kettles, 2/3 jacket, 42" cabinet base, electronic ignition, automatic boiler blow down, double pantry fill faucet, 3" deep stainless steel sink, CSD-1 package, water treatment system, split water line, safety relief valve, 316 stainless steel liner, 304 stainless steel exterior finish, 6" stainless steel legs & adjustable flanged feet, CSA Star, CSA Flame

Resources

Product PDF

Crown GMT-10-6 Specs

Brand Crown
Model Number GMT-10-6
Weight 800 lbs
Width 42"
Depth 33"
Height 66.13"
Base 42" wide cabinet
Kettle Liner 316 stainless steel

Crown Direct Steam Kettle on Gas Boiler Base

SPECIFICATIONS:

  • Shall be a Crown Model GMT-10-6 , consisting of two direct connected steam, tilting kettles, one 10 gallon (38 litre) and one 6 gallon (23 litre). A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispherical design for superior heat circulation. The kettle interior shall be of 316 stainless steel for high acid content products. The stainless steel mounting legs shall have the steam supply and condensate within the legs and the right leg fitted with a steam control valve for the kettle. Each kettle shall be fitted with a tilt handle and heat resistant knob, allowing the kettles to be tilted forward past 90° for complete emptying.
  • The kettles shall be mounted on a cabinet base with full perimeter angle frame, reinforced counter, hot and cold water faucet with control valves, 3” (76 mm) deep sinks with drain, grates and splash guard, gas boiler with controls, hinged doors with magnetic catches, removable side panels and 6” (152 mm) stainless steel legs fitted with 4 adjustable flanged feet for securing to the floor, all #4 stainless steel exterior with aluminized steel back. Steam manifolds concealed within cabinet are fitted with a safety relief valve and a steam trap for each kettle. Electronic ignition, nickel plating, CSD-1 boiler controls, automatic blowdown, and split water line.

FEATURES:

  • Water Treatment System
  • Electronic ignition
  • CSD-1 boiler controls
  • Automatic boiler blowdown
  • Split water lines (boiler feed and condensate)
Write Your Own Review
You're reviewing:Crown GMT-10-6 Gas Kettle Cabinet Assembly
Your Rating