Shall be a Crown models,
consisting of a direct connected steam, tilting kettle. A double wall kettle
interior shall form a steam jacket around the lower 2/3 of the kettle. The
bottom of the kettle shall be of hemispherical design for superior heat
circulation. The kettle interior shall be of 316 stainless steel for high
acid content products. The stainless steel mounting legs shall have the
steam supply and condensate within the legs and the right leg fitted with
a steam control valve for the kettle. The kettle shall be fitted with a tilt
handle and heat resistant knob, allowing the kettle to be tilted forward
past 90° for complete emptying.
The kettle shall be mounted on a cabinet base with full perimeter angle
frame, reinforced counter, hot and cold water faucet with control valves,
3” (76 mm) deep sinks with drain, grate and splash guard, gas boiler with
controls, hinged door with magnetic catch, removable side panels and
6” (152 mm) stainless steel legs fitted with 4 adjustable flanged feet for
securing to the floor, all #4 stainless steel exterior with aluminized steel
back. Steam manifolds concealed within cabinet are fitted with a safety
relief valve and a steam trap for each kettle.The kettles and boiler shall
be ASME code stamped and National Board registered. Water treatment
system, electronic ignition, nickel plating, CSD-1 boiler controls, and split
water line come standard.
The image above may not exactly represent the product
