Crown Steam Coil Cabinet Base
Do-All Compartment
Cooker
SPECIFICATIONS:
Shall be a Crown Models,
pressure compartment cooker with top compartment selectable
switch to operate in pressureless free venting mode, regenerative
steam coil boiler, c-CSA-us and NSF Certified, ASME code
stamped, National Board registered.The cooker shall be
constructed of all-welded type 304 #4 finish stainless steel.
The doors shall be of all welded one piece welded stainless
steel outer shell with a removable inner liner of aluminum plate
with full perimeter gasket seal with a wheel-and-screw closing
mechanism. The doors shall open a full 180° and latch upon
closing.
The compartments shall have a clear opening of 10-1/4” x 26-
3/8” (260 mm x 670 mm). Compartment operation shall be at a
maximum pressure of 6 p.s.i. (41 kPa).Each compartment shall
be provided with universal pan supports. Each optional sliding
shelf will support two full size (1/1 gastronorm) pans.
The control housing shall be constructed of #4 finish stainless
steel with a full-access removable panel. Each compartment
shall be independently controlled by an automatic timer control
with visible and audible signals. At the end of the cooking cycle
the controls automatically shut off incoming steam, vent pressure
and drain condensate from the compartment with a continuous
audible signal until turned off manually.
The compartment cooker shall be mounted on a cabinet base
with full perimeter angle frame, reinforced counter, regenerative
steam coil boiler mounted complete with controls, hinged doors
and 6” (152 mm) stainless steel legs fitted with 4 adjustable
flanged feet. Exterior shall be stainless steel #4 finish with
removable side panels for easy access to boiler