Crown SCX-16 Steam-Coil Convection Steamer

Crown SCX-16 Steam-Coil Convection Steamer

My Account Hello, Guest
Login or Register

Crown SCX-16 Steam-Coil Convection Steamer

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

Convection Steamer, steam coil, (2) compartment, (8) 12" x 20" pan capacity per compartment, 36" cabinet base, automatic blowdown, 60 minute timer per compartment, removable pan supports & drip trough, water treatment system, split water line, 316 stainless steel liner, 304 stainless steel construction, 6" legs, adjustable flanged feet, cCSAus


Product PDF

Crown SCX-16 Specs

Brand Crown
Model Number SCX-16
Weight 800 lbs
Width 36"
Depth 33.13"
Height 62"
Width (side to side) 36"
Pan capacity per compartment (8) 12"x20"x2-1/2" deep
Compartments 2

Crown Two Compartment 16 Pan Steamer with Steam Coil Boiler and Cabinet Base


  • Shall be a Crown model SCX-16 electric convection steamer with steam coil boiler. The steamer shall be constructed of satin finish stainless steel, type 304, with a cooking chamber of one piece all welded 316 stainless steel. The doors shall have a removable inner liner of stainless steel with full perimeter gasket seal, an outer liner of one-piece all welded stainless steel and a positive lock and seal mechanism. The door opening shall be 14” x 26.5” (356 x 673mm). The steamer shall be provided with removable stainless steel pan supports and a stainless steel drip trough connected to drain in order to collect condensate when door is opened.
  • The control housing shall be constructed of stainless steel with a full access removable side panel. The timing of each cooking compartment shall be independently controlled by a “60” minute timer, a green ready pilot light and a red cook pilot light. At the end of the cooking cycle an audible signal is sounded. Steam flow to the cooking chamber shall be interrupted when the door is opened during the cooking cycle and shall be reactivated when the door is closed.
  • The convection steamer shall be mounted on a cabinet base with full perimeter angle frame, reinforced counter, and boiler mountings, steam coil boiler with controls, all stainless steel exterior, hinged doors and 6” (152mm) stainless steel legs with 4 adjustable flanged feet for securing to the floor. Standard features include a water treatment system, automatic boiler blowdown, and split water line.


  • Water Treatment System
  • Automatic boiler blowdown
  • Split water line
  • Flanged feet
Write Your Own Review
You're reviewing:Crown SCX-16 Steam-Coil Convection Steamer
Your Rating