Crown SCX-2-6 Steam Coil Steamer Kettle Combination

Crown SCX-2-6 Steam Coil Steamer Kettle Combination

CWN-SCX-2-6
Details

Crown SCX-2-6 Steam Coil Steamer Kettle Combination

SKU CWN-SCX-2-6
Disclosure The image above may not exactly represent the product

$46,325.50

Net 30 or as low as 1,130.94/mo with Credit Key Apply Now


Call or Chat Call or Chat


Resources

Product PDF

Certifications

cCSAus
NSF

Crown SCX-2-6 Specs

Brand Crown
Model Number SCX-2-6
Weight 700 lbs
Width 44"
Depth 33"
Height 62.13"
Width (side to side) 44"
Pan capacity per compartment (3) 12"x20"x2-1/2" deep
Compartments 2
Certifications cCSAus, NSF

Crown Two Compartment Convection Steamer With Kettle with Steam Coil Operation

SPECIFICATIONS:

  • Shall be a Crown models, convection steamer complete with 6 or 10 Gallon Kettle on a modular boiler base operating on steam coil boiler base. The steamer shall be constructed of satin finish stainless steel, type 304, with a cooking chamber of one-piece, all-welded, type 316 stainless steel and shall be SCX-2, 14” W x 10.625” H x 21 D (355 mm x 270 mm x 533 mm). SCX-10, 14” W x 17” H x 21 D (355 mm x 432 mm x 533 mm).
  • The doors shall have a removable inner liner of stainless steel with full perimeter gasket seal, an outer liner of one-piece all welded stainless steel, and a positive lock and seal mechanism with spring release. The steamer shall be provided with removable stainless steel pan supports and a stainless steel drip trough connected to drain in order to collect condensate when door is opened.
  • Each compartment’s control housing shall be constructed of stainless steel with a fully removable side access panel. The controls shall include an illuminated on/off power switch. The timing of each compartment shall be independently controlled by a pilot ready light, a pilot cooking light and a 60 minute electric timer which sounds an audible signal at the end of the cooking cycle. Steam flow to the chamber shall be cut off when the door is opened during the cooking cycle and shall be reactivated when the door is closed.
  • The cabinet base with steam coil boiler and controls shall be provided with full perimeter painted angle frame, reinforced counter and boiler mountings, hinged door(s) with magnetic latch and 6” (152 mm) stainless steel legs with 4 adjustable flanged feet for securing to the floor.
  • Boiler controls shall include automatic water level control, pressure gauge, water gauge glass, operating pressure control, safety highlimit pressure control and safety relief valve. Unit comes standard with a water treatment system, split water line, CSD-1 boiler controls, and automatic blowdown. The unit shall be ASME code stamped and National Board registere, c-CSA-us and NSF certified.

FEATURES:

  • Water Treatment System
  • Split water line
  • CSD-1 boiler controls
  • Automatic blowdown
Write Your Own Review
You're reviewing:Crown SCX-2-6 Steam Coil Steamer Kettle Combination
Your Rating