Crown Gas Two Compartment
Convection Steamer on
Cabinet Base
SPECIFICATIONS:
Shall be a Crown models,
convection steamer with individual gas steam generators for
each cavity. AGA/CGA and NSF Certified. The steamer shall
be constructed of a satin finish stainless steel, type 304. The
cooking chamber is one piece all welded, type 316 stainless steel
with coved corners. The heavy-duty door shall have an inner
liner of stainless steel with a full perimeter gasket seal, an outer
liner of one piece all welded stainless steel, and a positive lock
and seal mechanism with spring release. Each compartment
shall be provided with removable stainless steel pans supports.
A stainless steel drip trough shall be integrally connected to a
drain to collect condensate when the doors are opened.
The control housing shall be constructed of stainless steel with
a full access removable panel. Each compartment shall have
individual control which include an illuminated three-way power
switch (On/Off/De-lime), a Ready pilot light, a cooking pilot light,
an Ignition pilot light, a 60 minute electronic timer which sounds
an audible signal at the end of the cooking cycle, solid state
generator controls and electronic ignition for each generator.
Steam flow to the cooking chamber shall be cut off when the
door is opened and reactivated when the door is closed.
Standard features include automatic generator blow down, delime mode power setting and de-liming ports for each generator
located on right side of the unit for easy access, and split water
connections for simple hook up to treated water systems.
The steamer shall be mounted on an all stainless steel
construction cabinet base with operable door for storage and
6” high stainless steel legs fitted with 4 adjustable flanged feet
for floor anchoring.
FEATURES:
Water Treatment System
Automatic generator blow down
Delime mode power setting
Deliming port for the generators which is located on the right side panel.
Split water connections for simple hook up for a treated water system.
6” high stainless steel legs fitted with 4 adjustable flanged feet for floor anchoring.
The image above may not exactly represent the product
