Crown Electric Two Compartment
Convection Steamer on
Cabinet Base
SPECIFICATIONS:
Shall be a Crown models,
convection steamer with individual electric steam
generators for each cavity, c-CSA-us and NSF Certified.
The steamer shall be constructed of #4 finish stainless
steel, type 304. The cooking chamber is a one piece all
welded, type 316 stainless steel with coved corners. The
heavy duty door shall have an inner liner of stainless
steel, with a full perimeter gasket seal, an outer liner
of one piece all welded stainless steel, and a positive
lock and seal mechanism with spring release. Each
compartment shall be provided with removable stainless
steel pan supports. A stainless steel drip trough shall be
integrally connected to the drain to collect condensate
when the doors are opened.
The control housing shall be constructed of stainless
steel with a full access removable panel. The controls
shall include an illuminated three way power switch (On/
Off/Delime), a pilot ready light, a pilot cooking light, a 60
minute electric timer which sounds an audible signal at
the end of the cooking cycle and solid state generator
controls. Steam flow to the cooking chamber shall be cut
off when the door is opened and reactivated when the
door is closed.
Standard features include a water treatment system,
automatic generator blow down, de-lime mode power
setting, de-lime port located at the rear of the unit for
each generator, and split water connections for simple
hook up for a treated water system. The steamer shall
be mounted on 23” high (for 10 pan), or 28” high (for 7
pan) with all stainless steel constructed cabinet base with
operable door for storage and 6” high stainless steel legs
fitted with 4 adjustable flanged feet for floor anchoring.