Shall be a Crown model SX-5G3, convection steamer with a gas fired
stainless steel steam generator. AGA/CGA and NSF Certified. The
cavity shall be 5 pan capacity. The steamer shall be constructed of a
satin finish stainless steel, type 304. The cooking chamber is a one piece
all welded, type 316, stainless steel with coved corners. The heavy duty
door shall have an inner liner of stainless steel with a full perimeter gasket
seal, an outer liner of one piece all welded stainless steel, and a positive
lock and seal mechanism with spring release. The compartment shall
be provided with removable stainless steel pan supports. A stainless
steel drip trough shall be integrally connected to the drain in order to
collect condensate when the door is opened.
The control housing, constructed of stainless steel with a full access
removable panel contains the controls which include an illuminated
three way power switch (On/Off/De-lime), a pilot ready light, a pilot
cooking light, 60 minute electric timer with audible alarm at the end of
the cooking cycle, solid state generator controls, and electronic ignition.
Steam flow to the cooking chamber shall be interrupted when the door
is opened and shall be reactivated when door is closed.
Standard features include automatic generator blow down de-lime mode
power setting and a de-liming port for the generator located on the right
side panel. The unit also comes with split water connections for simple
hook up to a water treatment system. Steamer is mounted on 4” high
stainless steel adjustable legs.
FEATURES:
Water Treatment System
304 stainless steel exterior.
316 stainless steel cooking chamber with coved corners.
Heavy gauge stainless steel door with full perimeter gasket.
Positive lock and seal mechanism with spring release door.
Illuminated power switch.
Ready indicator light.
Cooking indicator light.
60 minute electromechanical timer with end of cycle audible alarm.
The image above may not exactly represent the product
