Delfield 4427NP-6 27“ 1 Door Refrigerated Sandwich / Salad Prep Table

Delfield 4427NP-6 27" 1 Door Refrigerated Sandwich / Salad Prep Table

DEL-4427NP-6
Details

Delfield 4427NP-6 27" 1 Door Refrigerated Sandwich / Salad Prep Table

SKU DEL-4427NP-6

$3,222.00

Net 30 or as low as 78.66/mo with Credit Key Apply Now

Delfield 4427NP-6 Specs

Brand Delfield
Model Number 4427NP-6
Weight 223 lbs
Width 27.13"
Depth 31.5"
Height 42.14"
Top Type standard top
Sections 1 section
Refrigeration self-contained, rear mounted
Exterior Finish stainless steel front, top & sides
Access Type doors
Number of Doors 1 door
Compressor Style front breathing
Capacity (cu. ft.) 8.2
Cutting Board Depth 10"
Interior Finish white ABS, stainless steel floor
Pan Capacity (1/6 Size) 6

The Delfield 4427NP-6 Front-Breathing Self-Contained Salad Top Refrigerated Bases

Delfield 4427NP-6 Specification

Exterior Top

Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. Top of drawer unit has one opening to accept six or eight 1/6-size 4” (10cm) deep pans. Top of door unit has one opening to accept six or eight 1/6-size 4” or 6” (10cm or 15cm) deep pans. Adapter bars and 1/6 size pans are supplied by Delfield. Lid is constructed of 20-gauge stainless steel. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room temperature, meeting NSF 7 requirements. One 27” x 10” x .5” (68.6cm x 25.4cm x 1.3cm) polyethylene cutting board is mounted on the top at the front edge.

Dual Level Pan Brackets

Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance.

Exterior Back-Bottom and Interior Sides

Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with shelf supports. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.

Refrigeration System

Refrigeration system uses environmentally friendly R290 refrigerant. Condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 33°F to 40°F (0°C to 4°C).

ACT Control

ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.

Drawers

Drawers have 22-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Top drawer holds one full size 12” x 20”, 4”-6” (30.5cm x 50.8cm x 10.2cm) deep pan, and three 1/6 size pans. Bottom drawer holds one full size 12 x 20” and three 1/6 size 4” deep pans. Pans are supplied by others.

Delfield 4427NP-6 Standard Features

  • Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty
  • All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
  • Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance
  • Salad top refrigerators are standard with 10” wide, dishwasher safe polyethylene cutting board
  • “D” prefix models feature Delfield’s new drawer system. Drawers are backed by a 10-year warranty on the track assembly
  • High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low
  • Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 10’ (3.3m) long electrical cord and NEMA 5-15P plug.
  • Patented air screen ensures product stays cold without drying it out
  • Durable, rugged stainless steel sides, top and front
  • Delfield supplies 1/6 size pans and positive placement adapter bars for top opening
  • 4427NP-6: Single section with doors, six pan capacity
  • Environmentally friendly R290 refrigerant
  • Bent in full length handle
  • Standard on 5” casters for easy cleaning and installation
  • 10’ cord and plug supplied
  • One epoxy coated wire shelf standard, installed per door section
  • ACT solid state electronic control
  • Three year parts and labor warranty and an additional two year compressor parts warranty
  • Doors have a 22-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf per door opening.

Delfield 4427NP-6 Options & Accessories

  • Various lid options
  • 18” wide single tier overshelf
  • Stainless steel finish on back
  • Plastic laminate on front
  • Additional wire shelves
  • 3” casters, 4” ride height
  • Door lock
  • Exterior thermometer
Write Your Own Review
You're reviewing:Delfield 4427NP-6 27" 1 Door Refrigerated Sandwich / Salad Prep Table
Your Rating