Delfield ASM-48P Drop In Refrigerated Display Case
The open front not only puts product right in front of your customers but it is also great for speed of service and getting your customers through the line fast.
Slide out condensing units allow for easy serviceability.
The drop-in air curtain merchandiser include a night security cover
Sliding, locking doors provide easy access for loading product from the back - perfect for units built into a serving line.
Display section exterior sides are made of 18-gauge 1” stainless steel sides with 7/8” dual pane LOW-E argon filled insulated glass. Insulated sliding rear glass doors give operator access to the display case. Doors feature plexiglas ducts that direct air flow. The display section bottom shelf is a recessed pan, constructed with stainless steel. Recessed pan is insulated with high density foamed-in-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. Three 1/4” tempered glass shelves have three angle adjustments and are adjustable in 1” vertical increments. Stainless steel frames support the shelves. Four LED lights are standard, with an on/ off switch located in the control box. Two louvers are provided with the unit to provide proper air flow. Base cutouts to accommodate the louvers need to measure 17” x 28” (43cm x 71cm)
Refrigeration system consists of a full length base mounted evaporator coil with multiple fans circulating the air throughout the cabinet utilizing a thermostatic control. Refrigeration lines are piped to a single point connection with expansion valve. A sloped drain pan is placed below the coil with a 1 1/4” NPT connector. Units need to be plumbed directly to a drain or have an electric condensate evaporator (optional). Refrigeration system shall use HFC-404A refrigerant. Compressor and condenser coil shall be mounted below the display cabinet. Display section to maintain 36°F (2°C)to 40°F (4°C) degree temperatures at 80°F (28°C) degree ambient room temperature, 55% humidity.
Units are supplied with a 9’ cord, plug, and junction box. ASM-36 and ASM-48 electrical connections are 115V, 60Hz, 1Ph. ASM-36 and ASM-48 with condensate evaporator electric connections are 115/208-230V, 60Hz, 1Ph.