The Delfield CAB4-500 Mobile Enclosed Four-Stack Dish Dispensers
Delfield CAB4-500 Specification
Cabinet
Cabinet top shall be 16-gauge stainless steel with all corners welded and
polished and reinforced with heavy-gauge channels. Cabinet exterior panels
and corner support angles shall be 20-gauge stainless steel. Unit shall
have four 4.00" (10cm) diameter polyolefin swivel casters, and non-marking
gray bumpers at each corner.
Dispenser
Dispenser tube shall have 3 vertical side channels and a bottom brace of
22-gauge stainless steel. Top supporting flange shall be 18-gauge
stainless steel. Flange, channels and bottom brace shall be integrally
welded together. Flange shall have 3 guide posts molded from high impact
plastic.
Self-leveling Mechanisms
Self-leveling mechanisms shall be field adjustable by adding or removing
stainless steel extension springs on perimeter of vertical side channels.
The dish carrier head shall be stainless steel welded rods with a
removable 18-gauge stainless steel top plate.
Capacity
Capacity of tubes shall be approximately 72 dishes, with a maximum
stacking height of 24.00" (61cm). Models without “-ET” or “-QT” suffix are
unheated.
Delfield CAB4-500 Standard Features
Cabinet top to be 16-gauge stainless steel
Outer body and corners to be 20-gauge stainless steel
Non-marring gray corner bumpers
(4) 4.00” locking polyolefin swivel casters
Dispenser top flange, vertical side channels and bottom brace are
stainless steel
CAB4-500: 4 stack unheated dish dispensers
Dispenser flange, channels and bottom to be integrally welded
Spring supports to be 14-gauge S/S
Carrier head made of welded rods with a removable 18-gauge top plate
Field adjustable self-leveling mechanism
High impact plastic guide posts mounted to flange
One year parts and 90 day labor warranty Heated, QT & ET, Features
9’ cord and plug
Convection heating module and fan motor per dispenser
The image above may not exactly represent the product
