Delfield D4472RP 72

Delfield D4472RP 72" 4 Drawers Refrigerated Sandwich / Salad Prep Table

DEL-D4472RP
Details

Delfield D4472RP 72" 4 Drawers Refrigerated Sandwich / Salad Prep Table

SKU DEL-D4472RP

$11,208.00

Net 30 or as low as 273.62/mo with Credit Key Apply Now

Resources

Product PDF

Delfield D4472RP Specs

Brand Delfield
Model Number D4472RP
Weight 461 lbs
Width 72.13"
Depth 31.5"
Height 42"
Top Type standard top
Sections 2 section
Refrigeration self-contained, rear mounted
Exterior Finish stainless steel front, top & sides
Access Type drawers
Compressor Style front breathing
Number of Drawers 4 drawers
Capacity (cu. ft.) 28
Cutting Board Depth 17"
Interior Finish white ABS, stainless steel floor

The Delfield D4472RP Front-Breathing Self-Contained Raised Rail Prep Table

Delfield D4472RP Specification

Exterior Top

Exterior top is one-piece 18-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. Top of unit has openings to accept 1/3-size 4” or 6” (10cm or 15cm) deep pans. Adapter bars and 1/3 pans are supplied by Delfield. Lid is constructed of 20-gauge stainless steel. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2” (5.1cm) at 86°F ambient room temperature, meeting NSF 7 requirements. Unit will also maintain food safe temperatures at 100˚F ambient. One 17” x .5” (43.2cm x 1.3cm) polyethylene cutting board provided.

Dual Level Pan Brackets

Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance.

Exterior Back-Bottom and Interior Sides

Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with integral shelf supports. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.

Refrigeration System

Refrigeration system uses environmentally friendly R290 refrigerant. Condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 33°F to 40°F (0°C to 4°C).

ACT Control

Temperature control with adaptive defrost: ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.

Doors and Casters

Doors have a 22-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf.

Casters Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm).

Delfield D4472RP Standard Features

  • All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
  • Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty
  • Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance
  • Standard with 17” wide, dishwasher safe polyethylene cutting board mounted on heavy-duty cutting board brackets
  • High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low
  • Patented low velocity air screen ensures product stays cold without drying it out
  • Durable, rugged stainless steel sides, top and front
  • Rail accommodates 1/3 size or fractional pans with adapter bars
  • Standard with 1/3 6” deep stainless steel pans in the rail
  • Environmentally friendly R290 refrigerant
  • Integral s/s full length door/drawer handles
  • Standard on 5” casters for easy cleaning and installation
  • 10’ cord and plug supplied
  • One epoxy coated wire shelf standard, installed per door section
  • Electronic temperature control with adaptive defrost
  • Three year parts and labor warranty and an additional two year compressor parts warranty
  • D4472RP: Two section with doors, nine 1/3 pan capacity

Delfield D4472RP Options & Accessories

  • Various lid options
  • 18” wide single tier overshelf
  • Stainless steel finish on back
  • Plastic laminate on front
  • Additional wire shelves
  • 3” casters, 4” ride height
  • Door lock
  • Exterior thermometer
Write Your Own Review
You're reviewing:Delfield D4472RP 72" 4 Drawers Refrigerated Sandwich / Salad Prep Table
Your Rating