UL and NSF - All Delfield Drop-in products are UL approved and NSF
certified. Which means you can count on safe, consistent construction and
performance every time.
Convenience
Delfield Drop-in products are easy to install into any new or existing
counter. A press fit flange gasket comes pre-installed making the units
ready to drop-in immediately.
Quality
Delfield Drop-in products have an unmatched level of quality. The units
are reliably built by the best in the industry and come standard with a
90-day labor and 1-year parts warranty
Construction
Delfield Drop-in products are constructed with stainless steel tops and
interiors. Cold units are insulated with high-density polyurethane foam
and hot units are insulated with fiberglass.
Refrigeration lines are secured to the liner with stainless steel spot
clips and thermal transfer compound is applied to improve heat transferred
cool the food product better.
Delfield DIS-1200 Standart Features
Top flange, bottom brace and vertical side channels are stainless steel
Flange, channels and bottom to be integrally welded
Spring supports to be stainless steel
Carrier head made of welded rods with a removable top plate
Self-leveling mechanism, field adjustable by adding or removing springs
High impact plastic guide posts mounted to flange
One year parts and 90 day labor standard warranty
DIS-1200: Stacks 10.12"-12.00" diameter dishes
Delfield DIS-1200 Options & Accessories
Shorten dispenser tubes to special length
Stainless steel outer jacket for dispenser tubes-non-heated (standard on
ET or QT)
Non-marring adjustment rods for oval dishes and various dish diameters
(813–1450 sizes only)
Stainless steel dome cover with access to dishes (813-1450 sizes only;
standard on QT models)
Stainless steel tube cover (500-725 sizes only)
Hold-down rod for dispenser tubes
Special voltages
Delfield DIS-1200 Specification
Dispenser tube shall have three vertical side channels,
bottom brace and top supporting flange of stainless steel. Flange,
channels and bottom brace shall be integrally welded together. Flange
shall have 3 guide posts molded from high impact plastic. Self-leveling
mechanism shall be field adjustable by adding or removing stainless steel
extension springs on perimeter of vertical side channels. The dish carrier
head shall be stainless steel welded rods with a removable stainless steel
top plate. Tube shall suspend in a 28.00” (71cm) high space.Capacity of
tubes shall be approximately 72 dishes, with a maximum stacking height of
24.00” (61cm).
The image above may not exactly represent the product
